Quote from: Cryptoforthefuture99 on August 01, 2017, 12:47:16 AM

Quote from: mark82 on July 31, 2017, 10:15:08 PM

anybody know what i am doing wrong?

Not capable masternode: Could not connect to 62.238.79.24:9399

This usually means the port 9399 is not open on your router / computer. Open the port on your router using the port forwarding function and go here and check http://ping.eu/port-chk/ to check again.

yes it said it is blocked.
but i did what they say on the https://www.dascrypto.com/das-technologies/masternodes/windows-guide/
than why its not working?
i need to change something on my Asus RT-AC87U Router?

9. press WINDOWS BUTTON+R, this will bring up a Run menu

10. Enter cmd into the box and press enter. You will be presented with a console command window.

11. In this console, enter ipconfig, you will get something like this:

12. The IPv4 address under your ETHERNET ADAPTER will be your MASTERNODEADDR. Copy it down.

13. Go here http://whatismyipaddress.com/

14. This will show your EXTERNAL IP or OUTWARD-FACING IP, copy it down

15. Press WINDOWS+R again, enter wf.msc

16. This will open your windows firewall settings, on the left tab there will be Incoming Rules and Outgoing Rules, you must click on one and you will see an Actions tab on the right, the first being New rule.., click on that and you will be presented with a wizard to create a new rule for connections.

17. Click on PORT->Next

18. TCP/UDP Here we are going to create one for each for outgoing/incoming rules for a total of 4 rules (inbound TCP 9399, inbound UDP 9399, outbound TCP 9399, outbound UDP 9399)

19. Under Specific Ports enter 9399->Next

20. Allow all connections for All 4 Rules

21. Close wallet, go to your windows file explorer (open a folder). Type %appdata% into the address bar, navigate to the Das folder. Your location should read \Users\\AppData\Roaming\Das

22. In this folder there is a file titled das.conf, open it and enter this: