Quote from: Siberian on August 03, 2017, 04:53:07 AM

Quote from: nukl on August 02, 2017, 08:15:15 PM

Quote from: Siberian on August 01, 2017, 08:32:37 AM

Hi, guys!
I have Gigabyte GV-RX560 GAMING OC-4GD (Hynix(((), without overclocking I have 10.6 Mh/s.
Overclocking memory to 2000, brings an insignificant result. I have over9000 times tried to flash BIOS with different timings, but without success. Once I saw 16 Mh/s, but the driver left at once.
Substituting timings from Micron got 14 Mh/s at 2000 memory frequency it seems kind of stable, but HWinfo shows a lot of memory errors.
The best that could be achieved is 12.9 Mh/s and the overclocking of the memory of 1850 (with a small number of errors). I did not see in this topic that someone paid attention to memory errors. The question is: why does no one monitor errors? P.S.: GPU8 is 1050Ti. P.P.S: Sorry for my french.
https://cloclo41.datacloudmail.ru/weblink/thumb/xw1/FBcu/an3GMrmAg/560.jpg

Try to downclock core clock to 1050 - 1059. You will see higher rate and a little bit lower power comsumption Wink

Thank you! When I try, I'll write about the result.

Hi Siberian and other guys, I am new to mining with 4 x Msi Rx560 aero itx and 4 x GB rx560 oc with dual fan and 6pin power. Unfortunately my 8 cards have hynix memory too. And it's a big disappointing to me. I am not an expert of editing memory or straps or whatever they are called. I am reading these topics and other forums related to these and other tweaking bios forums. But I can say that I couldn't make it like what others say.

About Gigabyte rx560 Hynix; I can make only 13.2 mh/s - 13.6 mh/s (dual mode eth+dcr) but can't go up. I'll give the gigabyte bios here maybe you can edit or try or make to go it better. What I did is I just copied and pasted Msi 1750mhz timing straps to gigabyte 1750 to 2250, then set max memory speed to 2250. From 1625 to 2250 didn't work for me.(That's very interesting that dual mode is faster then single mod for me i tried too many -dcri values but i can make single mod faster than dual mod only claymore 9.6 version This is another topic to talk about)

This is msi bios 1750 mhz strap: 999000000000000022559D0031627C4990551313BC0D060C004C04017D0714204A8900A00200312019123138C02D3D17
And this is gb 1750 mhz strap: 999000000000000022559D0031627C4990551313BC0D060C004C04017D0714204A8900A00200000019123138C02D3D17 I make the font bold for you to see the difference. I checked it with strap editor and it's caused by the SEQ_MISC_8 (32Bit) setting is "2" for Gigabyte and "20310002" for Msi. When I copy msi value to gigabyte i can make it to go from 12 mh/s to 13.5 mh/s with this "-dcri 26 -tt 80 -fanmin 55 -fanmax 95 -mclock 2200 -mvddc 975 -cclock 1200 -cvddc 900 -powlim -15" claymore commands.

About MSI rx560 aero itx hynix memory; I can't make it to go over 12.1 mh/s. I just copied 1500, 1625, 1750 to 2000 or 2250 and tried max memory 2250 mhz or 2000 mhz or 2100. Tried several times but no luck. I just don't understand how people can make over 14 mh/s with this hynix memory. If I can make msi like gigabyte that will be ok for me.

Hope you can make it to go better. It's a very bad mining start to me with those crazy hynix memories. I'm really jealous of those people who can make 15 - 16 mhs with micron memories

Go to hell hynix Angry

Here is the modded bios link : gbrx560moddedbios1750 to2250max2250.rom - 256 KB