Quote from: zer0k on August 08, 2017, 01:40:28 AM

Quote from: dtmcnamara on August 08, 2017, 01:21:55 AM

Quote from: zer0k on August 06, 2017, 04:54:28 PM

Interesting

What are cards are you using?
How is that PSU held up over the top of the CPU and heatsink?
What are the temps like with the cover on?

Built a mount to hold the second PSU out of 1515 extrusion. Also designed a spacer to hold the first PSU out a little to route the second cable into the case.

Cards are all ASUS Turbo GTX 1080ti cards. Still working on fine tuning them but all cards are pulling around 190-200w

Temps were around 68-71C on all cards when I had the fans at 55-65% with 150CFM DELTA fans, and then dropped to 62-65C when I upgraded to 250CFM DELTA fans.

Very cool

I'm guessing you're using a super low profile heatsink/fan and the deltas are helping with the cooling Cheesy

Stock intel cooler works fine and temps are around 45-50C, running a G3950 so nothing beefy. There is about a 1/2" of room between the bottom of the PSU and the top of the cooler. The DELTA fans help make sure there is enough air exchanged for both of the PSUs and CPU to stay cool. Its a tight fit for the second PSU, but I think there is a 1/4" air gap when the case is closed, so plenty of room for the PSU to take in air. I have been thinking of making a scoop to force air into the top PSU, just havent gotten around to it yet. Still trying to source more cases so I can rack mount all of my systems.