Quote from: Gaza8143 on August 09, 2017, 01:27:30 PM

Quote from: damNmad on August 09, 2017, 09:02:16 AM

Quote from: Gaza8143 on August 09, 2017, 08:53:56 AM

Quote from: fullzero on August 09, 2017, 05:40:05 AM

Quote from: Gaza8143 on August 07, 2017, 12:48:30 PM

Hi guys, if posted prior my apologies as I tried to search this thread and the global threads.

My question is in regards to 'Maximus007_Auto_Temperature_control'

When I have it on it doesnt matter what I set the 'target_temp' for each card at it seems to like running the cards at 70 to 80 degrees and will up and down scale the fans to keep them there. Fans are at 30 - 35%.

I prefer a temp of 55 to 60.

Then I thought I would turn it off but even if I set manual fan to yes and the auto temp to 'no' my fan speed of 65% is not reflected so I think the script runs regardless of what you put in 1bash.

Anyone had this issue and either (a) found a way to make it respect the selected temperature or (b) disable it and allow for manual fans?

Many thanks!

change:

Code:

TARGET_TEMP_0=60

TARGET_TEMP_1=60

TARGET_TEMP_2=60

TARGET_TEMP_3=60

TARGET_TEMP_4=60

TARGET_TEMP_5=60

TARGET_TEMP_6=60

TARGET_TEMP_7=60

TARGET_TEMP_8=60

TARGET_TEMP_9=60

TARGET_TEMP_10=60

TARGET_TEMP_11=60

TARGET_TEMP_12=60

TARGET_TEMP_13=60

for b see:

https://bitcointalk.org/index.php?topic=1854250.msg20730240#msg20730240

Hi Fullzero,

With a fresh install of NvOC , changing target temps doesnt do anything on my rig. The fans do move up and down but they dont maintain target temp.

For example I set target temp as per your note to 60 and the cards run at 80. The fans go up and down on each card to maintain 80. The expected result is that they go faster to say 55% so the card runs at 60.

If I follow the steps in (b) this doesnt do anything different.

I am using v17 , was this an issue in 17? Or could it be my cards causing the issue
I am in Australia and we have celcius as our default temperature and you guys use farenheit could that be an issue somewhere?

In version v15 if I set manual fans to 70% they ran at 70% - for me in this version they seem to do their own thing Sad

I think living in Australia doesn't have anything to do with 'Maximus007_Auto_Temperature_control' script Cheesy

I would suggest try V18 and try the above suggested options, there were issues in v17 (I had similar one) so better try v18.

If the issue still persists in V18 share your 1bash with me, i will compare it to mine and see if there is any issue.

EDIT :

Lets give fullzero max time on development getting done for next releases by solving the minor issues ourselves

No worries ill download v18 and give that a shot. Is there a forum for minor issues such as this one as I agree with your suggestion.

So far V18 is working like charm by default, if there are any issues we are here to answer most of them

You are welcome