Quote from: dacutey1023 on August 15, 2017, 01:31:53 AM

Quote from: Chinezupwnz on August 14, 2017, 11:58:52 PM

Hello all

I have just completed my first 10 rings x6 GPU's, but i'm having some doubts that my settings are correct:

flashed all bioses
tried to get the optimized cclock mclock some cards are stable some cards are not

Using claymore dual miner 9.8
-mclock 1925-2000 (few cards are stable with 2k)
-cclock 1150
-cvddc 850
-mvddc 850
Afterburner for fan control

doing around 26-27.5 Mh's
at the end i'm doing the following hashes, which i think they are low

https://ibb.co/dDbfMa

Dual-mining is a bit unstable and i have even lower mhs for main eth.

Are this cards the weakest of the bunch?
If someone can lend me their experience, i would happily take any bits of advice

on the 4gb Elpida what do you get with
-cclock 1200
-mclock 1930

-cvddc 980
-mvddc 980

using GPUZ what is the watt showing and how many Mhs with this setting?

26.750-26.950 and power 78-82

cvddc and mvddc 850 draws around 60-65 power and its quite stable.