Quote from: uhro on August 16, 2017, 02:11:13 AM

Quote from: timnguyen on August 16, 2017, 02:07:51 AM

Hi guys, I am new here. So much drama. I concentrate on mining.

I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?

I don't run any 1060s, but 20mh sounds pretty good from what I've seen people posting about 1060s... the newest ccminer and CWI miner seem to be the best 2 miners for skunk right now.

Quote from: GeePeeU on August 16, 2017, 02:12:47 AM

Quote from: timnguyen on August 16, 2017, 02:07:51 AM

Hi guys, I am new here. So much drama. I concentrate on mining.

I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?

+100 core
+200 memory
75% TDP

should be fine.

Quote from: jimboscott on August 16, 2017, 02:48:19 AM

Quote from: timnguyen on August 16, 2017, 02:07:51 AM

Hi guys, I am new here. So much drama. I concentrate on mining.

I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?

20 is about the best you will do with a 1060. Probably run it around 75% power. The thing that is going to fail on your card is almost certainly going to be the fan(s). Try to keep them around 50% speed but still keeping your GPU around 70c. If you think about the effect of mechanical wear, it probably works like any other form of kinetic energy - based upon the square of the energy. Ie., my guess is that a fan running at 50% will last four times longer than one running at 100%.

Not really totally sure on that, but what little I remember from physics seems to somewhat jive with that idea.

Thanks you all.

Im currently using

+ 150 core
- 200 mem
90% power
80% Fan speed

I got abt 20mh, but dont know if this setting is good. Got worried on the card.