Quote from: secrecysiu on August 16, 2017, 04:27:49 PM

Quote from: ellein on August 16, 2017, 02:08:12 PM

Quote from: secrecysiu on August 16, 2017, 01:49:19 PM

Quote from: marimach77 on August 16, 2017, 10:36:13 AM

Quote from: secrecysiu on August 16, 2017, 10:18:26 AM

i try Claymore 9.8 -cclock -mclock, this is not stable, the memory suddenly drop to 1000mhz from 2200mhz , and then back to 2200 for few sec then back to 1000

I have the same behaviour in Claymore 9.8, also power is not stable. If not using -cclock -mclock I got stable 30.2MH/s for RX580 8GB and MSI Afterburned 4.4.0 beta 16 setup:
mV 970
core 1150
memclock 2150

yes confirmed AB is work with this driver, i got stable 30MH at core 1150 and mem 2150 for sapphire nitro+ RX580 8GB

anyone try this driver with 12+ GPU?

How many watts are they pulling? i've got that same card and im getting 31.8 mh/s and 920 dcr at 2250 but problably consuming too much power, around 110 W on GPU-Z

yes same as you 110W + 80W in HWiNFO64, and under voltage in AB is not work. anyone please help to under voltage for this driver.

Check the first post, if you follow it correctly, it just works, I have 3 rigs , 1 with rx470's and 2 with rx570's , from different vendors, they all work with undervolting, and are using around 850W each at the wall