Quote from: fred070 on August 21, 2017, 01:35:51 PM

Quote from: lards on August 21, 2017, 11:30:30 AM

Hey guys,

Does anyone know how to set up the autostart 1bash , temp control and watchdog bash files when you use SSH ? Is it possible to set up in a way so when I turn my rig on using SSH remote control , the 1bash will autostart and mining goes without me using ' bash /home/m1/1bash ' ?

I've tried to add these processes into the autostart but with no luck, I always have to open 1bash myself through the console.

Thanks for you help.

By the way, since in my set up I do not have any normal cards with video output(only using P106-100 cards) , I had problems with integrated graphics processor , when I installed the fresh OS on the rig without attached monitor to mobo and used SSH(for editing 1bash , etc.) it seemed to me that my usual "NVLM error 15 " or just freezing of the system doesn't come up as often as when I was using a monitor and local controling of the rig. I think this is because now in xorg files there's no mention of my "intel graphics". So everyone who has the same problem try to install the OS this way and remote control through SSH. I'm still to try and work around the overclocking these cards , hopefully fullzero will connect sometime soon and help me with that. thanks

Not sure if it's possible to use the integrated graphics in your mobo. Fullzero has a note in first page.

NOTE: If you are connecting a monitor directly to the motherboard (don't do this);
only connect a monitor to the primary GPU (the one in the 16x slot closest to the CPU)

I know you are just trying to help but if you read my post accurately I specified that I don't have any cards with video output so I can't connect a monitor to the primary GPU and therefore I explained what I've done to make it usable with my setup.

So does anyone know why the 1bash doesn't autostart when I use the remote connection through SSH(I have to use 'bash /home/m1/1bash' )? I am gonna try to work around that problem today but would be grateful if somebody can point me in the right direction of how to make it work.

As I stated before I have first booted without the monitor using just P106-100 cards and then changed all the bash files to new ones in the first post through SSH control.