Quote from: 4Dante on August 22, 2017, 10:41:52 AM

Hi, first post.

I waste a such of hours trying to install on W7 without results (claymore crash)

Finally i decided install on W10 and with my Rx570 got a bouncing 28 eth and 700 dcr.

-Rx 570 Asus Strixx 4GB
--Straps 1:1500->1:2000 // 2:1500->2:2000
--Mem. Elpida
--Mem. clock 1950 mhz
--Core clock 1100 mhz
--Power draw 150w avg Cry

So, the drivers almost works, the power draw and the bouncing its a problem, but my eth avg increase in almost 2 mh/s in comparation with W7 and lasted drivers, and the electricity in my country is pretty cheap, like 0.03 usd per k/w. So i will use this drivers for now.

Not a good bios mod! You can undervolt in bios, I've showed how in the guide, link in my signature. Then you can undervolt more in AB. 1100MHz should be like 800-850mV even less.