Quote from: TeamWinMiner on August 24, 2017, 01:05:53 PM

Quote from: thaskunk on August 24, 2017, 05:09:00 AM

Feature Request:
Allow for manual alternative power setting, as well as temperature threshold.
Minimum request - global value
Stretch goal - per card
I prefer to run my cards somewhat conservatively, and with my pending GTX 1070 x 6 build, I'd like to run them all at around 85% power - which keeps the temps low without taxing my fans, and only has a marginal cost to do it (at best).
When I manually put this into either MSI Afterburner or EVGA Precision, the settings displayed are not over-written, however the graph indicating what's actually going on shows that they are being ignored. A quick re-apply corrects it, however I do not have a function to re-apply the settings after every miner/coin/etc swap. I've poked at some of the configuration files, but I'm not sure which ones to use in order to get that result.
I've sent this to the support@winminer email alias as I wasn't entirely sure if it was a bug, but it appears to be intentional based on the mining software used.
Thank you for your attention.

That is very cool, could you please describe, in detail, step by step, the way you currently work to accomplish the use of afterburner with the miners (without WinMiner) it is important for us to get the full picture so we can try and accommodate your feature request in WinMiner.

You are welcome to respond here or to our support team

Sure thing - Since I use EVGA Precision or MSI Afterburner depending on which brand of card I'm running, I'll simply stick with MSI-A for this example (The process is identical for each utility).

1) Start MSI-A and set clock/core/power/fan settings. I use a saved profile for this.
2) When WinMiner starts actively mining, it wipes out my configuration
3) The configuration in MSI-A actually remains, but I cannot re-apply without a small change, so I make the small change and re-apply.
4) Winiminer changes miners/coins/etc - I make the small change and re-apply as in #3.

If there were a way to automate this process of setting the frequency/clock/etc from the command line I could have it change out every minute and simply alternate between 81-82% power and be happy about it (this wouldn't really give it enough time to get super hot or out of sync, but it does seem that some of the applications do support options for power settings (Specifically Claymore).

When running MSI-A/EVGA-P, the 'monitor' window and the temperature is what I'm using to indicate that my settings are simply not being held on to, despite the window of the system not being appropriately adjusted as well.

If you'd like for me to set up a screen sharing session to demonstrate this to your team, please ask them to respond to my support request and I'll happily do so. It only takes about 2 minutes to demonstrate this.