Quote from: Sakdrissi on May 13, 2013, 04:41:37 PM

Quote from: rudrigorc2 on May 13, 2013, 03:49:08 PM

When you reset, somehow, it should go back to default, which is, accordinly to the avalon user guide: 192.168.0.100

Well that worked..almost. I could enter failsafe-mode. Here's the instruction:
--
To get into failsafe mode, power up the device and wait until the LED starts flashing (about 2Hz). Once it starts flashing (within about 4 seconds) then quickly press the button. The LED will then flash much faster and the device will be in failsafe mode.
--

Failsafe IP is 192.168.1.1. I could telnet to the router. I checked

root@(none):/# cat /etc/config/network

config 'interface' 'loopback'
   option 'ifname' 'lo'
   option 'proto' 'static'
   option 'ipaddr' '127.0.0.1'
   option 'netmask' '255.0.0.0'

config 'interface' 'lan'
   option 'ifname' 'eth0'
   option 'type' 'bridge'
   option 'proto' 'static'
   option 'netmask' '255.255.255.0'
   option 'ipaddr' '192.168.0.100'
   option 'gateway' '192.168.0.1'
   option 'dns' '8.8.8.8'

Everything seems fine. Anyway, after rebooting I'm not able to ping or ssh 192.168.0.100.

Edit: Fixed it!
After making the filesystem writeable with "mount_root" /etc/config/network looked differently:

config interface 'lan'
   option ifname 'eth0'
   option type 'bridge'
   option proto 'static'
   option ipaddr '192.168.0.100'
   option dns '8.8.8.8'
   option gateway '192.168.0.101'
   option netmask '0.0.0.0'

Changed it. Reboot. Problem solved.
(And back to my original problem. Will probably talk about that later..)

Thanks for your great and fast help!

After entering failsafe mode you also reset to default settings.

Code:

mtd -r erase rootfs_data

Im using the latest 703n image(cgminer2.10.4) and now I have backup router again