Quote from: jimmykl on August 30, 2017, 12:55:14 PM

Quote from: notbatman on August 30, 2017, 10:20:25 AM

Quote from: Falcon494 on August 30, 2017, 10:16:44 AM

HI GUYS,

I need help !!!

CLAYMORE V9.8 mining ethereum

I am using ZOTAC GTX 1070 MINI GPU , with Intel pentium G4400 CPU, 4 GB DDR4 ram, 1500 Watt PSU silver edition

WIN 10 Verision 1703 , NVIDIVA Driver verision 385.41

everything works fine for 5 GPU, and basic hashrate 26 Mh/Sec and after MSI afterburner overclocking 30-31Mh/sec

PROBLEM :

when I add the 6th Card.. it runs for 3-5 mins and restarts windows ... it is like loop .

---
I even tried BIOS motherboard H110-D3A Gigabyte enabling 4G encoding.

still, it crashes and restart.

how to fix this issue..

any help... I even checked PCI riser cables .. unpluged and re plugged..

how to make 6th card working without crashing windows

Sounds like your psu is being overloaded by that 6th card.

I run 7x 1070 ITX stable on 1200W PSUs so 1500W should be heaps. As an aside I'd look at at least a gold quality PSU if you can swing it. Unless you have cheap power.

Check your BIOS version. Looks like it should be F23a which was relased in July https://www.gigabyte.com/Motherboard/GA-H110-D3A-rev-10#support-dl

Install the latest nvidia driver. The advice to use a particular version is out of date.

Don't OC until you get them all running to remove that as a factor.

If it's still resetting try a fresh install of Windows from scratch.

Thanks

But still even after BIOS update of motherboard version F23a , Re-installed drivers .. still it is crashing.. last option I need to re-install windows..

should I use only original windows so it doesnt crash.. and reboot

also checked windows event viewer which shows Kernel-PnP driver not responding and critical kernel power