Quote from: RSO_ on September 05, 2017, 05:35:25 PM

Quote from: leojoyms on September 05, 2017, 02:37:42 PM

In Sniffdog is better the 3 pools(Hash, Zpoool, MPH) or is better one (for example to Zpool)?

3 pools are better than one! Switching is very quick so you lose very little hashing power during the switch.

Quote from: Brucelats on September 05, 2017, 03:40:43 PM

My settings for 1080 Ti Seahawk X (liquid cooled Ti card) is

i=26,
mem - 500
core +125
power limit 90%

I get around 53.5 Mh/s and card temp is around 58-60 celsius.

What you think? I am still noobish with this Ti cards, dont know what clocks are safe, how is their performance etc etc.

Any suggestions / tips?

And about fan cooling the radiator, i think it's running 100% all the time, as it cant be controled, it's 3 pin fan. It runs on 100% all the time.

By the looks of the stats I guess you are mining Signatum? or at least using the skunk algo.
You don't normally need to set the intensity - also 26 seems a little high to me. 24 is usually good, but I've also managed okay in the past with 22.
The best Ti clock settings are usually:

mem -500
core +200
power: 70 - 80%

You lose very little hashing rate by dropping to 80%, so it's definitely worth doing. Also it allows you to run your fan slower - so between that and the lower core temp, your card will last longer.

The hashrate doesn't change whether my memory is set to 0, -500, -1000, -2000, etc so why -500?