Quote from: kusuma on September 11, 2017, 03:41:52 PM

Quote from: fullzero on September 10, 2017, 05:06:48 PM

Quote from: kusuma on September 07, 2017, 05:25:11 PM

Hello FullZero and all,
Thank you for this great rxOC v12, has been using it for two weeks with biostar tb250-btc pro 12pcie(but only 6 rx570 attached). Until today, I add another 6 rx570, it wont boot into my terminal, while I have enable 6+ gpu in bios, have set tolud to 3.5g, tried legacy/uefi combinations for storage and graphic in bios boot, still no luck today, the furthest I can go is until a message box pops telling me "the system is running in low graphics mode"(but I plug my hdmi into the same main gpu n monitor), if I click OK, it leads me to several options,
1, try running with default graphical mode
2, reconfigure graphics
3,trouble shoot the error
4, exit to console login
but I was unable to choose other options except the first one, which brings me back to "the system is running in low graphics mode".... if I move to console 2, I could login to cli, and able to start claymore manually with 12 gpus working.

I am lost now, switching back to 6gpu, and everything is working perfectly.

Somebody please enlighten me to let all 12gpus working.

Thank you in advance

I have had a similar experience using 6x proDuo (although this begins to happen when more than 3x proDuo are used) I will look into this more for v0013; for now what I am doing is starting the mining process via ssh on this rig, which is essentially the same as starting it manually from console mode, but easier as it doesn't require me to attach a monitor / keyboard / mouse to the rig.

I noted the ip for the rig, then on another computer; I use the terminal cmd:

Code:

ssh m1@the_rigs_ip_here

and press enter, then type yes (if it is the first time I am accessing the rig via ssh), then I enter miner1 as the password (unless you have changed it)

then I enter the cmd:

Code:

bash 2unix

this launches the OC, then mining process.

Thank you so much for your reply, will give it a try tomorrow.
Waiting for the better v013.

Looking at this I just realized it will not work without modifications. I have been making the following modifications to rxOC before doing the above:

copying oneBash to the /home/m1 directory

then changing the line in 2unix to launch the oneBash located in the home directory rather than the windows partition:

Code:

bash '/home/m1/oneBash'

After making these changes you can ssh in as explained above and launch the OC + mining process using either:

Code:

bash 2unix

or

Code:

bash oneBash