Quote from: DM2008 on September 28, 2017, 02:17:54 PM

Quote from: Valnurat on September 28, 2017, 11:37:37 AM

How do you read the charts?

If I use the exampel 0.11*Mhz=GH

0.11 * 150 = 16.5 GH

How much watts do I use?

Quote from: vh on January 26, 2017, 04:00:52 AM

=================
=Expected Performance=
=================
The expected performance of the 2Pac is 0.11*MHz=GH. For example, 150MHz gives 16.5 GH (theoretical expectation).

Rough chart of power draw:

If you want to run at 150Mhz, then look down the 150Mhz column. The watts you will use depend on the voltage you have it set to. You probably want to run at the lowest voltage that doesn't get HW errors, and according to that chart 1.26V -should- be ok and will draw 5.27watts or 1.05amps.

How do you control the voltage?

I bought them from bitshoppe.de