Quote from: Koal-84 on September 28, 2017, 03:06:33 PM

Quote from: suprnurd on September 28, 2017, 05:07:48 AM

Quote from: Buchi-88 on September 26, 2017, 03:32:34 PM

Hello,

i will setup a masternode on my Raspberry Pi, but i have problems by the compile....

Anyone have a HowTo?

regards

I have errors by the compile, anyone have a actually HowTo?

regards

You are probably missing a dependency or multiple dependencies. You will need to install them and make them available to the compiler before it will work.

Quote from: Koal-84 on September 27, 2017, 07:28:35 PM

Hello,

at time i compile the wallet on the Pi, i use this HowTo:

https://steemit.com/cryptocurrency/@crypto-wizard/launching-a-chaincoin-masternode-made-easy

but at the End i have this error:

Quote

make[5]: Verzeichnis /home/pi/chaincoin/src/qt wird betreten
CXX libchaincoinqt_a-walletview.o
In file included from walletview.cpp:21:0:
loggerpage.h:18:26: fatal error: QStandardPaths: Datei oder Verzeichnis nicht gefunden
#include
^
compilation terminated.
Makefile:1887: die Regel für Ziel libchaincoinqt_a-walletview.o scheiterte
make[5]: *** [libchaincoinqt_a-walletview.o] Fehler 1
make[5]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:2729: die Regel für Ziel all-recursive scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:1017: die Regel für Ziel all scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:1028: die Regel für Ziel all-recursive scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis /home/pi/chaincoin/src wird verlassen
Makefile:733: die Regel für Ziel all scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis /home/pi/chaincoin/src wird verlassen
Makefile:513: die Regel für Ziel all-recursive scheiterte
make: *** [all-recursive] Fehler 1

anyone have a solution?

If you're trying to build the GUI wallet, then you need to have QT5 installed. If you have both QT4 and QT5 installed, you will have to use the flag --with-gui=qt5 with configure. If you are just trying to build the command line version you can try ./configure --without-gui --disable-tests

The full build doc is here: https://github.com/chaincoin/chaincoin/blob/master/doc/build-unix.md

Voting results page is up: https://www.chaincoin.org/voting/

Big thanks go out to everyone who has voted so far! If you haven't voted yet and care about the future of Chaincoin, please go and vote!

Hello i have compile with this configure, but the same error...

./autogen.sh
./configure --with-gui=qt5
sudo make

Error:

Quote

AR libchaincoinqt.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
/usr/bin/ar: libchaincoinqt.a: Auf dem Gerät ist kein Speicherplatz mehr verfügbar
Makefile:1056: die Regel für Ziel libchaincoinqt.a scheiterte
make[5]: *** [libchaincoinqt.a] Fehler 1
make[5]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:2729: die Regel für Ziel all-recursive scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:1017: die Regel für Ziel all scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis /home/pi/chaincoin/src/qt wird verlassen
Makefile:1028: die Regel für Ziel all-recursive scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis /home/pi/chaincoin/src wird verlassen
Makefile:733: die Regel für Ziel all scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis /home/pi/chaincoin/src wird verlassen
Makefile:513: die Regel für Ziel all-recursive scheiterte
make: *** [all-recursive] Fehler 1
pi@raspberrypi:~/chaincoin $

regards

I marked the issue above in red. Thank you so much for making me google translate on your behalf, you've really made it easy for me to help you. Please feel free to also post blurry screenshots, incomplete log files, and ask questions that a simple google search could solve.

Just so that you can see that I am really trying to help you (and perhaps others who may come across this same issue) here is the error translated in english:
/usr/bin/ar: libchaincoinqt.a: No space is available on the device

Check your memory with the command free and check your storage with df -h

Quote from: Koal-84 on September 28, 2017, 05:15:05 PM

...

But always the same...

I don't know...

Post your chaincoin.conf file (scramble or remove your masternodeprivkey= ) so we can have a look or come to the slack channel #masternodes and #support (https://slack.chaincoin.org) and we can help you a lot quicker than on here.

Quote

11:38:01masternode start

11:38:06not capable masternode: Could not connect to 178.190.xx.xxx:11994

Why did your IP address change from the one in the screenshots above? If you change your IP then you also need to update your config.

Quote from: rorschach1 on September 30, 2017, 08:38:43 PM

ChainCoin should get listing to bittrex till the end of the year. In that case we can get chain mega pump again.

We have been waiting 2 months for Bittrex and nothing from them so it's unlikely we will get listed any time soon. That being said, we are working actively to improve on all sides of the project - there is still so much to be done! I'm sure that once we improve our value proposition and our trading volume increases, we will get listed by many previously unreachable exchanges.

Quote from: blockbasher on October 01, 2017, 07:07:21 PM

Guys I need help. Let me preface this by saying I screwed up majorly with one of my masternodes. I am running on Ubuntu 16.04 and it was working fine but it completely crashed without a backup and lost everything. I have the CHC masternode address that contains the coin as well as the CHC masternode Private Key. Is there any way to get the coin back and if so, how do I do it? I will send anyone a nice tip if they can help me get this back up and running. I do not have a copy of wallet.dat. I hadn't backed it up like I should have when the installation was finished and 2 days later, FAILURE

Would really appreciate some assistance if at all possible Thanks!

Did you delete the server? If you did not then I can probably rescue it. Find me in the #support channel of our slack (https://slack.chaincoin.org)

Voting Results - Community Engagement

The voting results are in: 39% of master node holders care about the future of Chaincoin and that is just great! Moving forward we have started actively working on keeping the community up to date via twitter and we are continuing to organize ourselves - thanks again to all the new community volunteers.

The next vote is schedule for October 12, 2017. Details surrounding that will be released before that date.

Join our slack: https://slack.chaincoin.org and come say hello to everyone!
We're also on twitter: https://twitter.com/chaincointeam follow us for updates.