Quote from: danspasiva on September 29, 2017, 05:43:19 AM

Quote from: insaniak on September 28, 2017, 11:28:58 PM

Quote from: lentyna on September 19, 2017, 04:50:33 PM

Does anyone else experience Windows 10 freezing when using NEMOSMINER on zpool multi algo? Sometimes it takes few hours to freeze, sometimes 10-15 minutes.

I run 7 Gigabyte 1080Ti 11GB

IM getting the same problem Im using 8 1070s Im not sure why. I get freezing and I also get CC miner has stopped working errors. Its frustrating because im trying everything and cant find a solution.

Perhaps I can be of help to you.

1. Sometimes just one of your cards is failing all the time and causes the ccminer to crash. This is almost always caused by a bad riser that should be replaced.

2. Make sure your memory overclock isn't too high.

3. Make sure your core overclock isn't too high.

4. Your overclocks will not work equally on all algorithms so you may need to lower some settings that seem to work fine on some algos but will cause others to crash.

Hopefully 1 of the 4 solutions I have posted will work for you, I'm 99% sure it's one of these things.

I was getting frequent system crashes and miner freezes because of my clock speed. I wasn't clocking A LOT, but it just happened to be that one of my cards didn't like to be clocked very much at all. Using 1080 Ti's I've found +100 core is about as high as it will go and remain stable. Memory seems to be fine going +500, but I leave it -500 as I've found it to be better overall across algos and power consumption.

FYI. This is only on a 4 GPU rig