Quote from: Trimqemali on September 30, 2017, 01:48:10 PM

Quote from: overcool on September 29, 2017, 06:05:31 PM

Quote from: Trimqemali on September 29, 2017, 05:28:17 PM

I cant boot xma from my usb. I just get the error below and then a blank screen. I do have only one asus 1060 oc card on my pci slot.
Checked dhcp, however no new ip discovered from DHCP.

https://ibb.co/fKME1G

Hi Trimqemali,

You can press Control + Alt + F1 for login.
User id:- prospector
Pass:- letmein3061

please run command ifconfig to check network connection,
Ip address also showing they..

Happy Mining.. ^_^

I managed to login now .. Thanks ... however i do have very low hash rate. My Asus 1060 wont go more then 3.9 MHs,
CPU TEMP:- 30
System Uptime:- 35 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 31.93 W, 88 %, 32, 569 MHz, 810 MHz

And here is my config:
NV_OC="1" # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2" # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="-90"
NV_CLOCK="-180"
NV_MEM="-1450"
NV_FAN="88"

Also on AUTO i do get the same POWER and HASHRATE... my card is powerfull isnt it ?

Hi,
I think you put a wrong setting. For GTX 1060 maybe you can try this setting.
And here is my config:
NV_OC="1" # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2" # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="85" # this to set max watt for the GPU is 85watt if not stable can put higher max is 120 for 1060
NV_CLOCK="-100" # set Core Clock -100
NV_MEM="1450" # Set 1450 MHz to the memory speed
NV_FAN="88" # Set fan speed to 88%

On gstatus out put screen, make sure the memory speed is more then 4000MHz.
Most of the DDR5 memory is stable at 4000-4200MHz
Please find out the stable setting for ur card...

Happy Mining ^_^