Quote from: treanski on October 01, 2017, 11:31:35 AM

Quote from: UnclWish on October 01, 2017, 10:05:56 AM

Quote from: notbatman on October 01, 2017, 09:27:22 AM

Quote from: UnclWish on October 01, 2017, 09:09:52 AM

Quote from: ChillyRide on October 01, 2017, 08:03:29 AM

Quote from: SnOOpeRa on October 01, 2017, 06:18:04 AM

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB.

XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall.
Ram usage normal, about 22% load. 22 gb page file + 8GB RAM.

How you achieved these speeds? Maybe any tuning of miners settings needed?
On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840.

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

My 580 is hynix memory with modded straps for ethereum. On eth i have 30M. But on XMR with 1350/2200 i have only 840-850 h/s. Whats wrong?

probably crap straps / miner settings...i have 920h/s with 1130/2100 with sgminer

What settings for sgminer you use? Intencity, worksize, gpu threads?