Quote from: wavelengthsf on October 05, 2017, 06:59:35 PM

I have a spare AUC cable at home and a Pi - i will test to see if it shows up with no miner when I get off work in a couple hours.

Do you have an ATX PSU you could try to hook up to the miners to see if that worked?

That would be great. Thanks for offering to do this.

I do not have an ATX PSU capable of powering the A741 unfortunately.

Does anyone here recall ever updating the USB drivers on the raspberry pi? I expect the factory firmware/fw downloaded from Canaan would have the correct drivers ahead of time, but figured I'd ask.

Here's the output when I try to manually start cgminer on the Raspberry Pi:

Code:

root@OpenWrt:~# cgminer -o us-east.stratum.slushpool.com:3333 -O userid.shop100:x
[2016-12-14 00:24:42.046] Started cgminer 4.10.0
[2016-12-14 00:24:42.212] No devices detected!
[2016-12-14 00:24:42.212] Waiting for USB hotplug devices or press q to quit
[2016-12-14 00:24:42.212] Probing for an alive pool
[2016-12-14 00:24:42.392] Pool 0 difficulty changed to 2048
[2016-12-14 00:24:43.214] Network diff set to 1.12T
[2016-12-14 00:24:43.214] Job clean message received
[2016-12-14 00:24:51.221] Stratum from pool 0 detected new block at height 488427
[2016-12-14 00:24:51.222] Job clean message received
[2016-12-14 00:25:20.874] Pool 0 difficulty changed to 409
[2016-12-14 00:25:20.876] Stratum from pool 0 requested work restart
[2016-12-14 00:25:20.877] Job clean message received
[2016-12-14 00:25:51.006] Pool 0 difficulty changed to 128
[2016-12-14 00:25:51.008] Stratum from pool 0 requested work restart
[2016-12-14 00:25:51.009] Job clean message received
Killed.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s