Quote from: dragon002 on October 09, 2017, 01:19:07 PM

Quote from: Leass on October 09, 2017, 12:27:11 PM

Quote from: Bulletdodger on October 09, 2017, 12:24:44 PM

Quote from: Leass on October 09, 2017, 12:17:49 PM

Quote from: milicic on October 09, 2017, 12:16:18 PM

Quote from: droghtak on October 09, 2017, 10:28:22 AM

4$ a day for 1080ti seems too high

Maybe it is some smaller pool which got lucky and found more blocks than it should, so profitability was a bit higher.

Well for hashrefinery (30days test) 5x Ti got stable 0.001/ea BTC per day (not excluding costs).
So it's 4-3$ per day.

Thanks, I'll give it a try!
Can I use ccminer 2.2.1 there? or which one?

I'm using latest version of sniffdog miner and ccminers that's included in it. (I'm only switching between skein and nist5 algo)

I've been struggling to have either Sniffdog or Nemo working stable on my rig. It will always crash at some point. Several times a day. I'm suspecting Alexis might be the biggest offender, but I don't think it's the only one.

What delays/intervals are you setting your miner at?
Also, while I've setup Speedfan to monitor GPU temps (and automatically reboot the rig if any GPU's temp falls below a certain threshold for 10 consecutive minutes), the rig will regularly disconnect completely (i.e. probably failing reboot - and becoming un-controllable from Teamviewer).

All in all a very unsatisfactory situation which I am struggling to fix. Was hoping there would be more people out there who could share similar experiences (and would be interested to know if and how they'd fixed it).

I've set delays at 150 - so I wont lose as much shares from switching every 30 sec ( sometimes, especially on skein 2-3 cards starts hashing right away, then last 2 after 45sec).
Are you OCd your cards? Maybe they are crashing because of too high OC on some algos (that's why I mine only skein and nist5 - they can be used with exactly same OC - also blake2s/lyra/skunk).
Also check Your PL - with some algos (like blake2s) your cards goes WoooooF throu their PL ranging from 10% to 100+% PL (depending on algo which is calculated at the moment). I've let my Zotac Amp Extreme bench with other cards on 100% - aircraf was starting from my PSU Cheesy

For remote controling I strongly advise Google Chrome Remote Desktop. One of few apps that let me reboot my rig and then access without problems You stated. Also You can use it from any device and it's completly free.
If You have any questions feel free to drop me PM, I'll answer all if I can