Quote from: codereddew12 on October 12, 2017, 05:06:04 PM

Quote from: Alienbert on October 12, 2017, 04:33:22 PM

Quote from: Alienbert on October 12, 2017, 03:48:40 PM

Quote from: papampi on October 12, 2017, 02:24:59 PM

Quote from: Alienbert on October 12, 2017, 01:57:17 PM

Quote from: damNmad on October 12, 2017, 01:07:46 PM

Quote from: Alienbert on October 12, 2017, 12:37:11 PM

Quote from: damNmad on October 12, 2017, 08:50:05 AM

Quote from: Alienbert on October 12, 2017, 06:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296 2017-10-12 08:24:09 Credit Confirmed 1131252 0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

I was having the same issue you were and then I switched to the ASccminer noted by papampi above and it works great now! I am running 3 rigs with 8-10 GPUs on each rig.

WOOW!!!
LOVE YOU <3
Now it works

How much do you OC and how many watts? now i tried with +50 +1150