Quote from: Dunkelheit667 on May 30, 2013, 03:54:58 PM

have to play around a bit later to get the display error fixed.

I've posted a short desciption to get them hashing...:
https://bitcointalk.org/index.php?topic=195037.msg2299251#msg2299251

---> for more than one device: cgminer-nogpu.exe --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COMx -S //./COMy

@Milquetoast
thx

Quote from: mr2dave on May 28, 2013, 11:46:30 PM

mineforeman is working on an update which will make these USB sticks plug & play, but until then, here's how I got minepeon beta 1 working with them now. *There may be a better way, this is just how I did it.

At the command line:
1. type (or copy/paste)

Code:

sudo nano /usr/lib/systemd/system/bfgminer.service

Now you're looking at a simple text editor
2. use the down arrow to find the line that starts with "ExecStart=" This is the command that will start bfgminer
3. on that line, use the right arrow to find "bfgminer -S auto"
4. change "-S auto" to "-S /dev/ttyUSB0" for a single miner, or "-S /dev/ttyUSB0 -S /dev/ttyUSB1" etc for multiple sticks
5. press ctrl+x to exit. nano will ask if you want to save your changes, press y.
6. type

Code:

sudo systemctl stop cgminer.service

(Stops cgminer)
7. type

Code:

sudo systemctl disable cgminer.service

(Stops cgminer from starting at boot)
8. type

Code:

sudo systemctl enable bfgminer.service

(Makes bfgminer start at boot)
9. type

Code:

sudo systemctl start bfgminer.service

(Starts bfgminer) You should now be mining, use the next steps to check
10. type

Code:

sudo screen -r

to display the miner's console interface, check to make sure it's mining
11. hold ctrl and tap a then d to exit back to the prompt without killing bfgminer

If you have any trouble, feel free to PM me. I'll provide as much help as I'm able.