44 minutes later, with fan 10% and voltage -1 . same situation
i will switch to raspb3 now
Update: no change.
Checked both PSU (all 4 braker boards). Voltage ok: 12.4 V
Can somebody please post a CGMINER API Log from the interface?
Thanks!
i will switch to raspb3 now
Update: no change.
Checked both PSU (all 4 braker boards). Voltage ok: 12.4 V
Can somebody please post a CGMINER API Log from the interface?
Thanks!
once again you don't wait 2 hours it takes time to show.
so what do you have after 44 minutes?
which is not long enoguh to test.
at -1 you should go over 14th but it takes more then 44 minutes.
although I don't like that row of zeroes you have.
at the moment I can not access my 721's or 741's
but I can tell you 44 minutes 7 minute is too low. 144 minutes and you got to 11.9 th
just run a long test stop looking at the logs.
ok, i will leave it like this until morning (it's 21 here).
but that TA = 66 (66 asics instead of 88) gives me nightmares
