Quote from: lezanch on October 15, 2017, 03:55:52 PM

Quote from: shavill on October 15, 2017, 04:41:17 AM

Quote from: hatshepsut93 on August 15, 2016, 09:26:49 AM

Quote from: calculatorduck on August 15, 2016, 09:04:09 AM

Thanks for sharing, I'm curious about ETH hashrate too if you can test it.

Didn't manage to run it, but I think it will be around 18.5 MH/s without manual OC.

Forgot to mention, my GPU is MSI ARMOR, core clock is 1900-1940 during mining (out of box speed), while tdp is 70-75%, temperature is 65-69 degress, ambient temperature is around 23.

Overall is seems to be 66% of GTX 1070 while being also 66% of it's price. So I would recommend to pick 1070 in most cases.

I run a couple rigs, one with 1060 3g and one with 1060 OC 6g and a couple 1070. The 1070's do run about 30% better rates, however, they also suck more juice at the wall, which translates into more heat and cost. I'd rather not pay for a PC heater thanks.

Right now the most efficient and cost-effective rig (people are gonna be hatin' I'm sure) are EVGA 1060 OC 6g single fan. A 6x rig will churn out 140mh/s+ while running at 68c and drawing only 500w at the wall. THAT is not bad for a cheap (never thought I'd call a $270 card cheap) card.

Mining Eth (power between 60-65%, core 0, memory clock +400-600 depending on GPU)
ALL EVGA
1060 3g 18mh/s
1060 OC 6g 22.5-24 mh/s
PNY 1070 OC Gaming 32.5 mh/s

Biostar BTC 250 MoBo, 8g, SSD, Celeron, EVGA 850 G2 Gold... cheap cheap cheap, room for 8 gpu's on that PSU BTW

Hint: Cheap out on everything but the PSU. Cheap PSU can blow the entire rig or worse... burn your house down.

cheers

Quote from: Gridden on October 13, 2017, 01:46:25 PM

Hi guys,

Anyone with 1060 Gigabyte windforce OC 6G here?

I got 6 of them in my rig. Hynix memory Cry

I'm pulling 1700-1750 sols on Zcash out of the box. do you have settings to get better hashrate?

Tried eth but i can't OC the cards more than mem + 500 or miner crashes.
I was getting 15,5Mh out of the box, 18,8Mh with core-200 mem+500 but even then it's not stable. i get hashrate drops and crashes. anyone had the same issue? got a solution?

Don't change your core clock, and especially not -200. The best stable I got underclocking the core was about -75. I've abandoned that entirely. Try keeping the core at 0, power at 65, and start at +500 on the memory clock as you have it now. Then run for a bit, and try adding +20 until you start becoming unstable.

You'll save on juice and should be able to get them above 22mh. All rigs are different, but 18 on a 6g of any flavor is really low.

Is there any difference between EVGA GTX 1060 6GB single fan and the same "Superclocked" version? in terms of mining performance I mean...

I couldn't say, but I'd think there shouldn't be too much of a difference if the cuda cores are the same. I only know what I run and what I've tried and so far the evga single fan 1060 OC 6g are the best bang for the buck and easiest on the juice. They basically run right around 80w per card at the wall. I'll know better when I finish building the next rig which will be exclusively 1060s. I'm expecting a 6x rig will run well below 500w and churn out 140-150mh/s. I'll know in a week or two and post.

Quote from: heavyarms1912 on October 17, 2017, 02:07:16 PM

Quote from: winiets on October 17, 2017, 11:43:49 AM

I get about 410-450 MH/s with 18 GTX 1060 6GB's
I run power limit 75%
MEm clock +550
They run at +- 65c
Now with the byzantium hard fork my earnings got trippled.
I now have an etimated earning of 1010$ a month at ethermine.

earnings aren't tripled. It's ~25% increase. With byzantium difficulty is dropped back to ~1600 from ~3000 while the mining rewards are 3 ETH/blk from 5 ETH/blk

Definitely not tripled. I'm doing 182mh/s and I've noticed it jumped from about .70 eth to .89 month. So you are spot on at 25% or so. Works for me. Tongue