Quote from: Branko on October 23, 2017, 08:18:16 AM

Quote from: notbatman on October 23, 2017, 04:33:33 AM

^^^ Gigabyte doesn't put Hynix memory in their GV-RX580AORUS-8GD card end of story. You're a proven liar, documented and archived by folks who put bankers owners in jail (Iceland). If that card has H5GC8H24MR (SK Hynix) GDDR5 RAM then Gigabyte didn't put it in there.

I saw it in other places, too:

https://anorak.tech/t/bios-mod-request-for-rx580-gigabyte-aorus-8gb-hynix/7864

Great, so it's not just this forum that's been spammed with this bullshit. If you read the comments some users are like WTF;

"You sure rx580 8gb aorus is hynix ? On my AMD info (ethos) i see samsung memory ELLESMERE .. x)" -- Nackophilz.

The rest of the comments are shills/fanbois/bots/sockpuppets like here we have yourself and whatomine;

Quote from: whatomine on October 21, 2017, 03:54:11 AM

Quote from: henyojess on October 19, 2017, 08:46:22 AM

I still need help with my poorly performing Aorus rx580 8g hynix card

Here is gpuz info:
http://oi66.tinypic.com/2hefzok.jpg

Original bios loaded into PBEv1.6.2:
http://oi66.tinypic.com/2cz5vrk.jpg

Actual original bios file:
https://drive.google.com/file/d/0B8S6GVg5txr5ZngzLS1WeTM1dE0/view

Hardware: Intel G3930, asrock fatal1ty gaming k4, 4GB DDR4, 4x1060,2x1070, 1xpciex1-4xpciex1 expander
OS: fully patched win10 pro
drivers:latest amd block chain drivers+atikmdag patch and latest nvidia drivers.
utilities: MSI AB beta 19 and sapphire trixx

Current modified bios using one click timing patch and reduced memory voltage:
http://oi63.tinypic.com/2kg09x.jpg

Current performance with claymore10:
http://oi64.tinypic.com/mvrgpj.jpg

current observed behavior:
when core clock is increased to 1000 and core voltage is offset down to 925mV(anything lower hangs)
hashrate becomes 27MH/s which is still below expected 29-30MH/s and temps become uncontrollable and eventually climbs to 79C even with fans at 80%

when mem clock is increased to 2040 at either 1000mv or 900mv, the system hangs as soon as mining starts.

I hope you guys can help me. Let me know if any details are still missing.

I have the same card and it is running at 29 Mh/s ETC + 800Mh/s LBC dual mining. My settings: 1150 + 2050 and 870mV for both mem and core voltages. The card draws 117 Watts reading from GPU-Z. The only difference in the rom that i'm using is the 750 mV was set for 300 Mhz instead of 800 mV as in your rom. The card does get lots of memory errors if running above 2050 mem-clock. Also, all of the setting was set in claymore and the fan speed was set to 50% using afterburner.