Quote from: Albortz on October 23, 2017, 08:42:48 PM

Quote from: wolfgangy on October 23, 2017, 07:46:03 PM

I have the same issue with my L3+. The miner starts showing some xxxx in aleatory hashboards.. I restart and it works fine again, sometimes the hashrate goes 0.00mhs.. restart and everything fine... now, it lost 1 of the hashboards.. I don't understand because the temperature it's fine..

The first two problems might occur because you do not have a stable amp. That could be because your outlet is shit, you run on 110V or simply because your PSU is either broken or some cables got loose.

I would try to unplug it and then re-plug everything. That might do the trick. You can also just lay the miner on the side that the cables don't bend

If that all does not help, you got a broken board and need to send it back to warranty (unless you OC it)

I had the same thing after they ran fine for 2 weeks, on AWP3 PSUs. Contacted Bitmain and they told me to reflash the image. Only thing that happened since was a random reboot of one of the L3's, other than that they seem fine. Have not seen an "x" since, fingers crossed.

Give it a try, worked for me.

Bitmain provided this firmware download link: https://s3.cn-north-1.amazonaws.com.cn/shop-bitmain/download/Antminer-L3%2B-201708251737-384M.tar.gz

Confusingly, exactly the same firmware as reported by my L3 before reflash.