Quote from: bitcoinguy123 on October 26, 2017, 12:58:33 AM

I totally agree with you about putting a separation on the patio area between exhaust and intake fans. I really liked the idea and will for sure implement something into the setup as such.

Most definitely there will be final touches and cleanup, but we basically pulled off old things that were attached to the walls and left it as is for now until we build the separation on the inside of the intake/exhaust areas. Then we are going to 'finish' it and of course will be putting in new LVT flooring or VCT tile depending on what we have in excess from leftover work we do in the property. I've got a room full of this and that comes in handy with leftovers of various repair jobs we encounter.

The PTAC is a 15,000 BTU air conditioner that I was planning on putting into the slot. I have lots of these units in spare (these units are normally used in motels/hotels for through the wall installations) and figured I'd just put one in that slot on the right window bottom as that is what is supposed to be for. I'm not planning on running the AC but figured for the really hot humid days we occasionally get (I'm in South Carolina) I figured it couldn't hurt. Since there is not additional investment of actually purchasing the unit, and its just sitting in the storage rooms on pallets figured I'd snag one for the 'mining room'.

Lemme ask you this... How many ac units you see in any farm?

I do not see the power there to run this farm either... you wrote 200amp panel 3 times. Did you mean a 20 amp circuit? Are they 220-240v? If your on 110-120v your already behind. Guess your pics dont show your "200 amp panels" BTW, Based on the receptacles, those are 15 amp not dedicated 20's. A true 110/120v receptacle has a slot in it and their plugs will not fit in a 15amp. Like this...

Forget the frigging AC and let the air flow. It is foolish to try and cool them. Let the air do what it does.

Snag one for the server room running your wallets. Which is not in the mining room.

Scrap'