Quote from: wmabern on October 30, 2017, 08:44:48 PM

Well, procrastinating (lazy-ass) me has finally switched all of my miners to the NY node. I have intended to do it since its inception, but..... I never bothered to check the ping times. I'm in IT, BTW, so I should know better... Roll Eyes

I'm located in Western North Carolina, so it shouldn't be rocket science for me to use the NYA node.
Anyway, here are my results:

C:\WINDOWS\system32>ping stratum.kano.is

Pinging stratum.kano.is [45.76.68.6] with 32 bytes of data:
Reply from 45.76.68.6: bytes=32 time=82ms TTL=47
Reply from 45.76.68.6: bytes=32 time=79ms TTL=47
Reply from 45.76.68.6: bytes=32 time=95ms TTL=47
Reply from 45.76.68.6: bytes=32 time=79ms TTL=47

Ping statistics for 45.76.68.6:
   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
   Minimum = 79ms, Maximum = 95ms, Average = 83ms
~~~~~~~~~~~~~~

C:\WINDOWS\system32>ping nya.kano.is

Pinging nya.kano.is [104.207.132.42] with 32 bytes of data:
Reply from 104.207.132.42: bytes=32 time=51ms TTL=46
Reply from 104.207.132.42: bytes=32 time=32ms TTL=46
Reply from 104.207.132.42: bytes=32 time=99ms TTL=46
Reply from 104.207.132.42: bytes=32 time=35ms TTL=46

Ping statistics for 104.207.132.42:
   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
   Minimum = 32ms, Maximum = 99ms, Average = 54ms
~~~~~~~~~~~~~

Additionally, a note to @Kano. I know someone has previously offered to add the Kano info to their full node. I don't recall if there was an answer.
I have been running a full node for about a year and I would gladly add the Kano ID/IP to my node if it would help with our block propagation. I usually have about 50 good peers on my node.

If there is any interest, Kano, please feel free to PM me in response. Thanks!

COMEONBLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cool

I'm in IT and just changed to NY node since in in NY yesterday after seeing a mention of it in the thread. Prior to that I just had it setup with what I saw on the website.