Quote from: sdz123 on June 06, 2013, 10:46:20 AM

Thanks for the quick reply!

No I haven't installed any drivers. I just tried to build the one you linked to but it fails.

Ubuntu 13.04 uses the 3.8.0-22 kernel which as far as I know already has the driver built in. /dev/ttyUSB0 appears so I guess this implies it does. Here's my syslog when i plug the device in :

Jun 6 11:09:43 admin kernel: [59068.804377] usb 1-1.1.4: new full-speed USB device number 27 using ehci-pci
Jun 6 11:09:43 admin kernel: [59068.898123] usb 1-1.1.4: New USB device found, idVendor=10c4, idProduct=ea60
Jun 6 11:09:43 admin kernel: [59068.898133] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 6 11:09:43 admin kernel: [59068.898140] usb 1-1.1.4: Product: CP2102 USB to UART Bridge Controller
Jun 6 11:09:43 admin kernel: [59068.898146] usb 1-1.1.4: Manufacturer: Silicon Labs
Jun 6 11:09:43 admin kernel: [59068.898151] usb 1-1.1.4: SerialNumber: 0001
Jun 6 11:09:43 admin kernel: [59068.899049] cp210x 1-1.1.4:1.0: cp210x converter detected
Jun 6 11:09:43 admin kernel: [59068.972376] usb 1-1.1.4: reset full-speed USB device number 27 using ehci-pci
Jun 6 11:09:43 admin kernel: [59069.065156] usb 1-1.1.4: cp210x converter now attached to ttyUSB0
Jun 6 11:09:43 admin mtp-probe: checking bus 1, device 27: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1.4"
Jun 6 11:09:43 admin mtp-probe: bus: 1, device: 27 was not an MTP device

When I try and communicate directly with "screen /dev/ttyUSB0 115200" I get not output. Never tried this before so not sure if that means anything.

I would like to get this running on Linux (eventually my Raspberry Pi) and I don't have Windows so I'm unable to try any Windows programs / guides.

sorry, have to ask - hub is connected to external supply/wall wart?

Otherwise, your built in driver may be icompatible