Quote from: chew1992 on November 02, 2017, 01:47:00 PM

Quote from: chew1992 on November 01, 2017, 03:54:02 PM

Is the overclock function actually work on Simplemining?

I'm using the RX OS dagfix and tried changing the settings to something like core 1150, mem 2200, undervolt 900, my hashrate is lower than normal. I replicate this with afterburner, the results are the opposite. I tried bring the value close to stock, my hashrate got messed up, it's like I'm better off not doing anything.

I even tried with just undervolt 975 --> 950 --> 925 --> 900 just to see if it is working. My cards are drawing the same power of the wall as stock. I tried by bringing down the powerstage to 6 --> 5 --> 4, it's still drawing the same power. It's like nothing has changed.

Each time I change the overclock settings, I hard reboot (power off and on) the rig just to see if that works. Apparently it did not.

I have a 8 GPU RX 580 rig and a 12 GPU RX 580 rig which is currently trying out using simplemining. I can't seem to get overclock to work, either drop of hashrate or power stays the same.

Can anyone advise what I did wrong?

To add the above, I just realised overclock settings only apply to all but 1 gpu. With the 8 GPU RX 580 rig, only 7 is applied, same goes to the 12 GPU rig.

Does anyone experience the same as what I'm facing?

I have tried putting separate OC with "," since im running 5 of one brand (Aorus) and 5 of another (powercolor red dragon). All 10 are rx580 8gb If i run 5 of Aorus I get 31mhs and the other 5 powercolor i get 29mhs. luckly i was able to use same bios on all 10 (not sure if that is a good thing). When I run all 10 and put individual OC's in it doesnt work correctly. I suspect that SM has the cards numbered gpu0,1,2,3 and so forth but when you look at them under the core/mem tab on the main screen of SM, it seems that gpu0 is really gpu1, and so forth. not sure if im saying it correctly but the pattern of the different hash rates didnt match up correctly until i set them as 1 thru 10 and not 0 thru 9. either way, I couldnt get them to all work correctly. It has been a long run trying to get them working. I ended up lowering the cards that do 31 to the OC settings of the cards that do 29 and sacrifice 10 mhs and just put in one OC.

My settings are
1200
2145
900
4 powerstage. (doesent seem to matter what power i select, nothing changes)

pulling 1640w from wall