Quote from: bytiges on November 03, 2017, 07:39:02 AM

Quote from: Permonik on November 03, 2017, 05:51:57 AM

Hi,
So, how is going? My rig was stable for 72h, after that one of the card shows 0 and miner freeze. I am noticed that after 6h. Because win was still alive, watchdog was useless.
What is weird was that in the windows log was not a driver display error, but the wattman settings was reset on two cards...
So I am changed a voltage a little bit and decressed intensity and I will see how long it will be alive.

Unfortunately in my case it did not survive so well. 8 or so hours in the test one of the cards locked up. I ran cast-xmr for a cross check and it's been stable for about 12 hours now.
Today I'll try gen1 settings in the slots.

I noticed that the card that locks up is usually the one with index 1. Incidentally, that *was* the card that needed a little extra voltage to run stable at 1100 hbm freq. And I thought that I was pushing it a little hard. In the past I tried running that card as low a 900 Mhz but that did not fix the issue.

Yesterday, I rewired the board and reinstalled the drivers. Now that card is index 2 however, the card that locked up was still index 1 of stak-amd and that card was stable before.

And btw. the card in the x16 slot never locked up on me. So the x16 slot might have something to do with lockups or might not.

Hi,
My card in 16x never lock up too, but I experienced the problems every couple hours. And now, it was stable for longest time ever...
Where can I download cast-xmr? What I downloaded was only executable file and one another file...