Quote from: kyogi14 on November 07, 2017, 09:54:40 PM

Quote from: mutual.consent on November 07, 2017, 08:40:54 PM

Quote from: Quubik on November 07, 2017, 07:39:39 AM

Quote from: mutual.consent on November 06, 2017, 10:28:24 PM

I went for an ASUS B250 Mining Expert and have a v64 and a v56 @ 64 along with a 1080 ti running stable. My main issue to date has been trying to get power draw at the wall to resemble hellae and everyone else's whilst maintaining high hash rates. I've found that the only way to curb power draw is to set core to go 1308/1100 @ 905 mV on both Vegas, 1408 core increases power draw at the wall by 100w for a ~200 h/s benefit. With the 1080 ti mining Zcoin (135w) total system power draw at the wall is 495w and the Vegas hash at 3650 h/s. That's not as good as I had hoped and I'm beginning to think the motherboard is the culprit. Power supply is rm1000x so I don't suspect that is the issue. Risers are 006c powered via 6 pin PCI-E, could they be causing higher power draw? Have followed all the guides and used hellae and my own custom power play tables - this has me stumped...

1408mhz causes thee high powerdraw. I am not sure why...

Dial it back to 1400 and you should be good !

Thanks. That strangely seems to have solved my issues for now. 3850 h/s for just over 500w with the 1080 ti now.

What voltages are you using for core and mem now? 905mV for both?

I'm just using hellae's 1100 HBM reg file with the core dialled back to 1400 instead of 1408 on both cards. I think it has 905mV core and 900mV memory but I may be wrong. Will need to check when i get some time to tinker with the rig again. Seeing others @ 1200 HBM makes me think I'll be back to tinkering very shortly...