Quote from: taserz on November 08, 2017, 11:26:41 AM

No not really. There was a blog post and a forum post about this months ago I got mine up to 700mh/s to see if I could do itI didn't make a post. It was proven the L3+ are really sensitive to OC and burn up rather fast above stock. Hell even at stock they are likely to go bad.

-

I got 3 L3+'s that had a board go on them at 462mhz. This is in an environment that that ambient temperature is generally 45-60F aka Nice and cold. Soon the environment will be freezing or colder.

I am bit confused here. First you said you OC'd to 700 MH/s and that the L3+ was really sensitive and burned up rather fast.
Could you please refer me to your post and answer these questions if they aren't addressed in your post?
How and why? Its temps are at par with other L3+ stock settings? Can you please be specific for me please. I thought HW were okay so long as effective hashrate was stable.

Then you state you have 3 more or a total of 3 L3+ with one going out at 462 and the other at 700?

My ambient temp during the day is also 50-60F during the day and 30-45 at night in my garage with good air flow. I also run my Etherem mining rigs in their and they remain cool.

So are you down to 1 L3+? Or all of them with 1 of the 4 boards not working?

---

I just turned the fan up to 100%, which I am not going to keep it at that and here is it readings...

Elapsed   MH/S(RT)   MH/S(avg)
7m32s
650.845
609.57
Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1
72
500
163.42
268
I:0 O:32
I:0 O:39
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo
2
72
500
162.76
167
I:0 O:31
I:0 O:38
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo
3
72
500
162.02
412
I:0 O:30
I:0 O:37
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo
4
72
500
162.65
207
I:0 O:30
I:0 O:38
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo
Fan#   Fan1   Fan2
Speed (r/min)   6,210   6,240

---

So the TEMP PCB is 1-4; 32 31 30 300
And the TEMP (Chip) is 1-4; 39 39 38 38

----

Fans at 100% are 6,210 and 6,240
When I didnt have a %fan checked the fans were at 3,120 and 3,180
So I think I am going to try setting the fans at 60% or so assuming 6240 is 100% and that keeps Chip Temp at 40 and 3180 had them at 59-54-54-52.

Ill post an update in a day or two.

Thanks all!

-----------

HERE IS THE PHOTO / SCREENSHOT OF MY L3+ RUNNING AT 500M FREQ AT 650 MH/S FOR 25.5 HOURS
https://ibb.co/hQ6V0w

----------

AGAIN HERE IS A LINK FROM BITMAIN ABOUT TEMPS AND OTHER INFO FOR THE L3+
https://enforum.bitmain.com/bbs/topics/4959