Quote from: oblione on November 16, 2017, 07:32:46 PM

Hi Guys

I'm wondering if you can help me with this.

my rig keeps rebooting shortly after the miner starts on this and I cant figure out why.

I'm using 4 x vegas
1200w PSU
latest blockchain drivers
32gb virtual mem
8gb ram

I've got the fans set manually it wattman to 3000rpm min
I've disabled all other over / underclocking and am just trying to run this as a baseline test before I start playing with the other settings

The miner starts up, runs for a few seconds and then the rig just resets and wattman resets everything.

The rig works brilliantly on cryptonote but I fancied giving some eth dual mining a try for a while.

Anything that would normally cause this type of behaviour?

May i ask your PSU model?

Do not take for granted that since cryptonote runs fine so will Eth cause different algorithms have different electrical behavior and requirements.

I suggest you try to mine only Etherium without second coin.
If it's stable, please measure your power consumption in the wall and tell us how many watts it takes.
If it's not stable even with single Eth, then run Cryptonote and report the power consumption in that case.

We can draw better conclusions with the above data.