Quote from: Victorio on November 17, 2017, 02:55:43 PM

Quote from: chanyewhau on November 17, 2017, 02:44:11 PM

The memory size is 6144 MB, memory type is Hynix.
My current OC setting is Power Limit 75%, Core Clock +50, Memory Clock +300, Fan Speed 65%.
With the current OC setting, the cards are running at GPU Clock 1566 MHz, Memory 2152 Mhz. (Based on GPU-Z)
...
The problematic fan that runs at 100% automatically has the lowest temperature even it is running at 65% like the other cards.
So i dont think the fan switch to 100% due to overheat.

No one likes Hynix memory on nVidia - it has too high latency and does not hold very well overclocking. It's a surprise to know that 6GB GTX 1060 also use Hynix chips, I thought they carry only Samsung and Micron.
Your fan goes 100% because of driver error, that is caused by unsustainable overclocking settings. Since you overclock by MSI Afterburner, check-out the Synchronize settings across similar cards and define lower clocks for the problematic GPUs.

Hello, thanks for your advise.

So i should untick the option in MSI Afterburner to sync the same setting to similar cards.
And define lower clocks to the problematic GPU?

Like probably running at core clock +30? Memory clock +200?