Quote from: the.vlado on November 24, 2017, 09:12:39 PM

Quote from: greenhope on November 23, 2017, 11:50:54 PM

Quote from: the.vlado on November 23, 2017, 05:02:35 PM

I am getting message
Error: I could not see your service on xxx.xxx.xxx.xxx on port (9919)
Reason: Connection timed out

But I am getting same message when I am checking another port for different coin MN.

Looks like your port is not open.
Did you forward port 9919 from your router?
You can check from this site, too.
https://www.yougetsignal.com/tools/open-ports/

Finally, master node is now running, at least in the console: "Masternode successfully started!"
Sentinel is also running without errors.

After waiting 15-20 minutes status was changed from WATCHDOG_EXPIRED to ENABLED.

If you read the source code or your debug log, you'll see that the MN doesn't announce for 15-20 minutes after its happy. It logs as "Too early to send Masternode ping" or similar. This is normal behavior based on the code. Its a bit longer than other MNs. Don't act like its a problem.

What was the issue? I had to enable port forwarding on router. I though that it was open, but I tried that as a last option. Spend more time in trying to find password for it than doing actual port forwarding setup.

Thank you all!

If you read the source code or your debug log, you'll see that the MN doesn't announce for 15-20 minutes after its happy. It logs as "Too early to send Masternode ping" or similar. This is normal behavior based on the code. Its a bit longer than other MNs. Don't act like its a problem.