Quote from: onyx369 on November 27, 2017, 03:17:08 AM

Vosk,
Great post and great video.
Got time for a question or two?

I've been watching your videos and dude they are 'top tier' for us n00bs.

I am replicating CryptoChicks 1070 TI build.
I have the 13 GPU asrock motherboard and a 1200 parallel miner server PSU.

Problems: (with the 100% server PSU in mind, not ATX)
1. Can you clarify exactly what cable/adapter you use for the CPU/8 pin EPS slot on the asrock MB?
2. Noting the 6 pin PCIE cables that come with the server PSU, what specific adapter did you use to power the "2" molex ports on the motherboard?

Lastly, you and Quintleo refer to afterburner OC settings. Would you mind sharing the settings that you throw into the 1bash (NVOC) clock/memory settings for your 1070 ti rig?

Thanks again and keep up the great work!

haha appreciate that brother

I've actually been having an issue with that, going to order a couple adapters here soon to figure it out
https://www.newegg.com/Product/Product.aspx?Item=9SIA85V3DK6375&ignorebbr=1&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Cables+-+Internal+Power+Cables-_-9SIA85V3DK6375&gclid=Cj0KCQiA6enQBRDUARIsAGs1YQjkYn5zLt0WbLbFPv_Pxjs77Zefx4wN9oPytaWE3hbuuRlDF-kOKPkaAshiEALw_wcB&gclsrc=aw.ds i was looking at something like this, this exact one might be too short though to reach the distance between the 2 molex ports on the board. . will update when I figure it out

@citronick powers a lot of boards with just the 4 pin off a pico psu atx adapter in either the left 4 or the right 4 of the 8 pin slot, there's also 4 pin to 8 pin adapters which I have but didn't get to see if it worked because the board wasn't working with just one molex plugged in

https://goo.gl/5G6pHU atx adapter
https://www.amazon.com/StarTech-com-8-Inch-ATX12V-Extension-ATXP4EXT/dp/B000O7WFHA 4 pin to 8 pin cpu