Quote from: Cereberus on November 27, 2017, 09:11:19 AM

Quote from: Aidub5 on November 27, 2017, 08:00:36 AM

Well the risers on the original 3 all work without issue. When I plugged the 4th riser and GPU in is when there was an issue however I don't think it's the riser. If I leave that one plugged in and unplug one of the original 3 risers the system works just fine.

All the risers use a 4 pin molex for what it's worth.

Go to the BIOS of the motherboard and change configuration of PCIE express slots from Auto to GEN1. That solves your problem in 99% of the cases where everything else is working correctly.

Also before trying that try to lower the power limit of your GPU-s to check if maybe you have a faulty PSU which does not give the needed power to them.

I had one problem with a 3 x RX 480 board in a Thermaltake 700w gold plus which should supposedly run them pretty well, well it didn't until I turn down the power limit to -60% and from there no problem anymore.

Unless I'm missing something in my bios, I don't see anywhere I can make changes to my PCIE settings unfortunately. Anyone have the same board as me that might be able to point me in the right direction?