Quote from: bwillyb on November 27, 2017, 05:33:09 PM

Quote from: papampi on November 27, 2017, 05:21:27 PM

Quote from: bwillyb on November 27, 2017, 04:59:20 PM

Why my rig stops after 15 hours ?
I have 4X geeforce windforce gtx 1070

Temp: GPU0: 70C GPU1: 67C GPU2: 59C GPU3: 69C
GPU0: 443 Sol/s GPU1: 445 Sol/s GPU2: 453 Sol/s GPU3: 445 Sol/s
Total speed: 1786 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 129W | 3.43 Sol/W |
| 1 | 135W | 3.30 Sol/W |
| 2 | 134W | 3.38 Sol/W |
| 3 | 133W | 3.35 Sol/W |
+-----+-------------+--------------+

I have a corsair 1200W
MB: ASUS PRIME Z270-A
now power wall is only 615W

power limit at 140W each one
__CORE_OVERCLOCK_1=150
MEMORY_OVERCLOCK_1=580

Not enough info
Check your wdog logs, may be utilization dropped, internet had a hiccup, or ....

Mon Nov 27 00:30:56 CET 2017 - reboot in 10 seconds
Mon Nov 27 00:46:48 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 01:32:44 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 04:47:39 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 05:03:25 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 05:40:57 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 05:55:32 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 06:54:42 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 08:31:25 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 10:01:26 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 11:03:27 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 13:13:01 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 13:52:24 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:01:38 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:01:48 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:01:58 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:02:08 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:02:18 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 15:02:28 CET 2017 - Utilization is too low: restart 3main
Mon Nov 27 15:03:41 CET 2017 - Utilization is too low: restart 3main
Mon Nov 27 15:04:53 CET 2017 - Utilization is too low: restart 3main
Mon Nov 27 15:06:05 CET 2017 - Utilization is too low: restart 3main
Mon Nov 27 15:07:20 CET 2017 - Utilization is too low: restart 3main
Mon Nov 27 15:08:32 CET 2017 - Utilization is too low: reviving did not work so restarting system in 10 seconds
Mon Nov 27 16:57:48 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 17:11:23 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 17:45:45 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 18:14:25 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures
Mon Nov 27 18:17:36 CET 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures

Ok, we see from that that the watchdog is detecting low utilization and restarting the miner and after 5 miner restarts, reboots the host. That is the normal behavior of the watchdog script. Now we have to find out why the miner is not mining. Can you check /home/m1/screenlog.0 for errors from the miner?