Quote from: markcarline2 on December 17, 2017, 03:32:32 PM

Quote from: markcarline2 on December 03, 2017, 10:15:03 AM

My first moonlander 2 just turned up !

all working. This is a picture of my setup:

https://imgur.com/a/U68EH

Consists of:

1) Raspberry PI 3 with official Rapsberry PI 3 power supply
2) Cheap USB 2.0 7 port hub - Pluscom Model u7PH-3A (not using the power supply as the Pi seems to be enough for this) cascaded into:
3) Plugable USB 3.0 7 port Hub (inc 12V 5A 60w psu) - Model: USB3-HUB7BC

3 more are in the post in the way so will be testing more plugged into the same when i can (going to try and do 7x all at the time time via extension cables)

Been running now for about an hour now litecoinpool reporting hashing at 3,498kH/s (so far so good!)

Boom!

UPDATE:. This is still running plus I've now expanded it to use 4x moonlanders at 756 speed. One is using a USB extension cable but seems to be ok. All getting around 4,492 kH/s from litecoinpool

Are you using raspian stretch? My moonlander are not being detected under stretch.