Quote from: BenHacked on December 08, 2017, 07:04:21 PM

I'm hoping someone has already encountered this and has a quick answer. Otherwise I'll do some digging this weekend. I have set up the ckpool on just a clean local server. If I'm reading the error correctly, it's the URL in the ckpool.conf file that's throwing the error when trying to bind to stratum port. I also haven't seen any info on increasing the rcvbufsiz. TIA.

Code:

[2017-12-08 12:52:01.802] ckpool generator starting
[2017-12-08 12:52:01.802] ckpool stratifier starting
[2017-12-08 12:52:01.802] ckpool connector starting
[2017-12-08 12:52:01.803] Failed to bind socket for 192.168.1.46:3333
[2017-12-08 12:52:01.803] Connector failed to bind to socket, retrying in 5s
[2017-12-08 12:52:01.962] Failed to increase rcvbufsiz to 532480, increase rmem_max or start ckpool privileged
[2017-12-08 12:52:02.215] ckpool generator ready
[2017-12-08 12:52:02.215] Connected to bitcoind: localhost:8332
[2017-12-08 12:52:02.287] ckpool stratifier ready[2017-12-08 12:52:06.803] Failed to bind socket for 192.168.1.46:3333
[2017-12-08 12:52:06.803] Connector failed to bind to socket, retrying in 5s
[2017-12-08 12:52:11.803] Failed to bind socket for 192.168.1.46:3333
[2017-12-08 12:52:11.803] Connector failed to bind to socket, retrying in 5s

Assuming you have the correct IP address and you're not trying to bind to a privileged port, usually that means something else is bound to the port already. The rcvbufsiz message tells you what you need to change in your linux config (sysctl.conf). If you're only going to be using ckpool locally it is not needed.