A big thanks Storx.
I started out with DDR3L 1600/1333MHz 1.35 volt as that's what Onda states on its website:
http://www.onda.cn/MotherBoard_Specifications.aspx?id=373I then went to DDR4 SO-DIMM DDR4 2133 1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.
I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V P (or D) R (or 4) 1710.
Cheers
I actually had this exact question thought I had the ram I needed but I definitely dont
@phil what ram are you using for the onda
This is for the board you sent me
Anyone have a link to ram that will definitely work?
...
What connections needs to be powered and what doesnt? // all these sata and molex?
I standardized on this based from seller recommendation - over a dozen of the D1800 with this DDR3 4gb standard notebook RAM installed with smOS USB3 stick - already in production - no issues.