Quote from: citronick on December 09, 2017, 05:26:02 AM

Quote from: VoskCoin on December 09, 2017, 05:17:31 AM

Quote from: ATCkit on December 08, 2017, 09:48:41 PM

A big thanks Storx.

I started out with DDR3L 1600/1333MHz 1.35 volt as that's what Onda states on its website:

http://www.onda.cn/MotherBoard_Specifications.aspx?id=373

I then went to DDR4 SO-DIMM DDR4 2133 1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.

I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V P (or D) R (or 4) 1710.

Cheers

I actually had this exact question thought I had the ram I needed but I definitely dont

@phil what ram are you using for the onda

This is for the board you sent me

Anyone have a link to ram that will definitely work?

...

What connections needs to be powered and what doesnt? // all these sata and molex?

I standardized on this based from seller recommendation - over a dozen of the D1800 with this DDR3 4gb standard notebook RAM installed with smOS USB3 stick - already in production - no issues.

https://www.aliexpress.com/item/Brand-ADATA-RAM-DDR3-8GB-1600MHz-Ram-Memory-204-Pin-SO-DIMM-1333-Compatible-For-Lenovo/32302931186.html?spm=a2g0s.9042311.0.0.5ephHI

I have the onda d1800 and I just got the manufacturer of the mobo to supply the ram as well.