Quote from: BigMcRat on December 10, 2017, 10:51:32 AM

Quote from: Demarsac on December 10, 2017, 09:21:41 AM

Quote from: BigMcRat on December 10, 2017, 07:18:00 AM

Quote from: sailor32 on December 09, 2017, 09:21:05 PM

Quote from: ConstantinGR on December 06, 2017, 12:17:38 PM

GUIDE:
HOW TO MOD OPTIMINER 1.2 FOR WINDOWS TO MAKE IT WORK WITH NVIDIA GPUS

1. Download both Optiminer 1.2 for Windows and Optiminer Equihash 2.0 for Linux.
2. Extract both files in two separate folders.
3. Go to the Optiminer 2.0 folder and navigate to the "bin" subfolder. Find the following 8 files named Nvidia_Equihash192_7-base.bin and Nvidia_Equihash192_7-round1.bin, [...] , Nvidia_Equihash192_7-round7.bin.
4. Copy these 8 files and place them in a new folder. Then rename them as follows: Nvidia_base.bin, Nvidia_round1.bin, [...] , Nvidia_round7.bin.
5. Copy the renamed files and go to the Optiminer 1.2 folder and navigate to the "bin" subfolder. Paste there the files you just copied (overwrite the original files found there).
6. Optiminer 1.2 should work fine now. For better compatibility, use --pci-mode 0 in your config (or *.bat) file. Also, if you have a rig with both Nvidia and AMD gpus, I would suggest running one instance of Optiminer for each platform, by using the -c switch.

That's all folks.
I 've tried all sorts of things and spent a lot of time to make the damn thing work, so if it works for you and you 'd like to show your appreciation, send some coins to my ZERO address:

t1Xit7hfbfTW2EPvkVs9xP6AN5bD3Ri9BTE

I just did this a few hours ago and my rigs appears to be much more stable. Pulling 11+ sols/s out of all my 1070s with no need to restart every 15 min to 2hrs. Thank you.

I ve tried, too but I can only get two of my 4x 1070 to run, with 4 the hashrate goes down to 6-8 sols and cpu is on 100%, someone can run more than 2 Cards with high hashrate ?
Is there a Switch to reduce the high CPU usage ?

The low end cpu's load will be close to or even 100% unfortunately as this is a problem with the mining software and Nvidia's
BUT
With this same low end cpu i promise you can run a 7x1070 Rig without any problems and stable hashrate

Just give us a bit more info about your setup so we can help
Thanks

DM

Hi DM,
my config is Windows 10 64bit, Intel Pentium G4400, 8GB Ram, 2x KFA 1070, 2x ASUS 1070
AfterBurner config - Clock +200 / Mem -500 / 60% TDP

other miners run smooth, can you help ?

Edit: NVIDEA Driver 388.59

You are suppose to increase memory clock not decrease it..