Quote from: crazydane on December 11, 2017, 05:52:23 PM

Quote from: papampi on December 11, 2017, 05:36:58 PM

Does it quits on remote or local or both?

Restart miner and try to catch the command by :

Code:

ps ax | grep -i pluscpu

or

Code:

ps ax | grep plusCPU

Copy the output and run it with from /home/m1/ .... to the end in guake terminal to catch if miner quits or some thing else kills it

I don't have a local display attached, I run remote only. I captured the command that executes and when I execute it from a ssh session, the miner works fine.

Code:

m1@miner06:~$ /home/m1/cpuOPT/cpuminer -a cryptonight -o stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20580 -u crazydane.115 -p x -t 10

   ********** cpuminer-opt 3.6.3 ***********
   A CPU miner with multi algo support and optimized for CPUs
   with AES_NI and AVX extensions.
   BTC donation address: 12tdvfF7KmAsihBXQXynT6E6th2c2pByTT
   Forked from TPruvot's cpuminer-multi with credits
   to Lucas Jones, elmad, palmd, djm34, pooler, ig0tik3d,
   Wolf0, Jeff Garzik and Optiminer.

CPU: Intel(R) Core(TM) i7-6850K CPU @ 3.60GHz
CPU features: SSE2 AES AVX AVX2
SW built on May 18 2017 with GCC 5.4.0
SW features: SSE2
Algo features: SSE2 AES
Start mining with SSE2

[2017-12-11 12:45:25] Starting Stratum on stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20580
[2017-12-11 12:45:25] 10 miner threads started, using 'cryptonight' algorithm.
[2017-12-11 12:45:26] Stratum difficulty set to 500054
[2017-12-11 12:45:29] CPU #4: 66 H, 28.78 H/s
[2017-12-11 12:45:30] CPU #5: 66 H, 28.43 H/s
[2017-12-11 12:45:31] CPU #0: 66 H, 19.10 H/s
[2017-12-11 12:45:31] CPU #1: 66 H, 18.81 H/s
[2017-12-11 12:45:31] CPU #2: 66 H, 18.74 H/s
[2017-12-11 12:45:31] CPU #3: 66 H, 18.53 H/s
[2017-12-11 12:45:31] CPU #7: 66 H, 18.11 H/s
[2017-12-11 12:45:31] CPU #8: 66 H, 17.94 H/s
[2017-12-11 12:45:31] CPU #9: 66 H, 17.73 H/s
[2017-12-11 12:45:31] CPU #6: 66 H, 15.76 H/s
[2017-12-11 12:45:44] CPU #8: 250 H, 18.93 H/s
[2017-12-11 12:45:44] CPU #0: 267 H, 19.87 H/s
[2017-12-11 12:45:44] CPU #3: 262 H, 19.65 H/s
[2017-12-11 12:45:44] CPU #1: 264 H, 19.71 H/s
[2017-12-11 12:45:44] CPU #4: 447 H, 30.59 H/s
[2017-12-11 12:45:44] CPU #9: 250 H, 18.96 H/s
[2017-12-11 12:45:44] CPU #5: 441 H, 30.21 H/s
[2017-12-11 12:45:44] CPU #2: 263 H, 19.62 H/s
[2017-12-11 12:45:44] CPU #6: 208 H, 16.32 H/s
[2017-12-11 12:45:44] CPU #7: 252 H, 18.97 H/s
[2017-12-11 12:46:39] Stratum difficulty set to 350009
[2017-12-11 12:46:39] CPU #8: 1046 H, 18.90 H/s
[2017-12-11 12:46:39] CPU #2: 1087 H, 19.65 H/s
[2017-12-11 12:46:39] CPU #7: 1048 H, 18.94 H/s
[2017-12-11 12:46:39] CPU #0: 1099 H, 19.85 H/s
[2017-12-11 12:46:39] CPU #5: 1673 H, 30.23 H/s
[2017-12-11 12:46:39] CPU #4: 1693 H, 30.58 H/s
[2017-12-11 12:46:39] CPU #9: 1046 H, 18.89 H/s
[2017-12-11 12:46:39] CPU #3: 1088 H, 19.65 H/s
[2017-12-11 12:46:39] CPU #1: 1090 H, 19.68 H/s
[2017-12-11 12:46:40] CPU #6: 905 H, 16.34 H/s
[2017-12-11 12:47:35] Stratum difficulty set to 245006
[2017-12-11 12:47:35] CPU #1: 1097 H, 19.75 H/s
[2017-12-11 12:47:35] CPU #7: 1055 H, 18.98 H/s
[2017-12-11 12:47:35] CPU #0: 1108 H, 19.94 H/s
[2017-12-11 12:47:35] CPU #9: 1054 H, 18.96 H/s
[2017-12-11 12:47:35] CPU #2: 1097 H, 19.73 H/s
[2017-12-11 12:47:35] CPU #4: 1702 H, 30.62 H/s
[2017-12-11 12:47:35] CPU #5: 1685 H, 30.31 H/s
[2017-12-11 12:47:35] CPU #6: 903 H, 16.26 H/s
[2017-12-11 12:47:35] CPU #3: 1097 H, 19.73 H/s
[2017-12-11 12:47:35] CPU #8: 1055 H, 18.97 H/s
[2017-12-11 12:48:31] Stratum difficulty set to 171503
[2017-12-11 12:48:31] CPU #8: 1055 H, 19.01 H/s
[2017-12-11 12:48:31] CPU #0: 1109 H, 19.97 H/s
[2017-12-11 12:48:31] CPU #2: 1097 H, 19.76 H/s
[2017-12-11 12:48:31] CPU #6: 906 H, 16.32 H/s
[2017-12-11 12:48:31] CPU #9: 1056 H, 19.02 H/s
[2017-12-11 12:48:31] CPU #4: 1702 H, 30.65 H/s
[2017-12-11 12:48:31] CPU #5: 1685 H, 30.34 H/s
[2017-12-11 12:48:31] CPU #7: 1057 H, 19.03 H/s
[2017-12-11 12:48:31] CPU #3: 1097 H, 19.75 H/s
[2017-12-11 12:48:31] CPU #1: 1099 H, 19.78 H/s
[2017-12-11 12:48:46] CPU #2: 296 H, 19.58 H/s
[2017-12-11 12:48:46] CPU #9: 284 H, 18.79 H/s
[2017-12-11 12:48:46] CPU #8: 285 H, 18.81 H/s
[2017-12-11 12:48:46] CPU #4: 462 H, 30.52 H/s
[2017-12-11 12:48:46] CPU #5: 457 H, 30.20 H/s
[2017-12-11 12:48:46] CPU #3: 296 H, 19.57 H/s
[2017-12-11 12:48:46] CPU #0: 301 H, 19.84 H/s
[2017-12-11 12:48:46] CPU #1: 297 H, 19.63 H/s
[2017-12-11 12:48:46] CPU #7: 286 H, 18.89 H/s
[2017-12-11 12:48:46] CPU #6: 246 H, 16.22 H/s

When I do a control-c to kill it, watchdog never attempts to restart it. I also never get email notifications that it quit.

So for now, I'm just running that launch command from the ssh window and things are running smoothly again like on 19-1.4

EDIT: That launch command is showing -u crazydate.115 where it should be -u crazydane.solar

mph ignores the password, but is should be passing along the MINER_PWD set in 1bash should it not?

In my case, that would be:

Code:

# For zpool use MINER_PWD="$WORKERNAME,c=btc"
MINER_PWD="solar" # Set the miner password. Default: x

It just so happens that the ip address I have mapped to miner06 is 10.0.1.115. Coincidence?

OK, another bug in 3main, but I think its irrelevant as mph says it doesnt check the worker password
Password is missing from 3main launch command

Change from :

Code:

guake -n $HCD -r plusCPU -e "$HCD -a cryptonight -o stratum+tcp://$XMR_POOL:$XMR_PORT -u $XMRADDR -p x -t $threadCOUNT"
else
screen -dmS plusCPU $HCD -a cryptonight -o stratum+tcp://$XMR_POOL:$XMR_PORT -u $XMRADDR -p x -t $threadCOUNT

To :

Code:

guake -n $HCD -r plusCPU -e "$HCD -a cryptonight -o stratum+tcp://$XMR_POOL:$XMR_PORT -u $XMRADDR -p MINER_PWD -t $threadCOUNT"
else
screen -dmS plusCPU $HCD -a cryptonight -o stratum+tcp://$XMR_POOL:$XMR_PORT -u $XMRADDR -p MINER_PWD -t $threadCOUNT

There is also some settings in 0miner, open 0miner
in xmr section, change

Code:

"pool_password" : "x",

to

Code:

"pool_password" : "MINER_PWD ",

Also can you post contents of this file after you start miner if it fails:

Code:

/home/m1/xmr/stakGPU/bin/config.txt