Quote from: sergitocrf on December 12, 2017, 02:14:58 PM

Can someone help me?
I've got 6 x rx 580 nitro+ but I can only run 4 when I put the 5th the program only recognize 4 and the rate of mining down.
With 4 I am mining 124.5 mh/s but when I put 5 (only works 4) I am mining 82mh/s.

This is my SM config:
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $wallet/$name -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1

And this is my OC SM:
Core MHz: 1200
Memory MHz: 2250
Core Undervolting: 850
PowerStage: 3
Target cº: 64
Minimum Fan speed: 50

MotherBoard: Asus B250 Expert miminig
Power supply: HXCorsair 1200i

With 4 graphics 640w from the wall so I dont thing that the problem is the power supply. any ideas?

Thanks in advance

Have you checked the screen at the begining. You must see all expansion slots in green if not check wires risers.
I prefer use https://hiveos.farm with this moterboard I find too much fail now with SMOS.
On ETH for memory 2250 is TOO HIGH in my opinion I put 2100/2150 maximum
For weeks when SMOS doesn't reboot or reload when there is a problem. All is green but the rig is freeezing you must look at the console to see time is 2 or 3 hours sooner.

I ordered some B250 minig expert to migrate my other rigs on hiveos.
I have 5 rigs on SMOS at the moment 2 on HIVEOS. Now I have another problem with smos some rigs have ZERO h but it is OK for smos all is green so I must reboot manually the rigs with hiveos you can tuned your rig and if the rig is under the amount you put it reload or reboot automatically.

Tytanick I apreciate your OS it was the first I used but now there are too much fails and the gui is not friendly to use to change the pool, the adress, etc.. with hiveos you can mixed nvidia and amd on the same rig. Look at hiveos there are a lot of good ideas. Of course it was a very bad idea to limit report on the gpu we need to see all the information on the gpu.

I had also the fail with 511° and I must reboot.

Now I have a zero h on one rig

the dashboard on HIVEOS where I said 10 GPU but there is only 9 ;-)

I can use usb keys with hiveos on all my MB, on some MB with smos I must use SSD. On hiveos no fail "no screen attached"

explanation for WatchDog

WD = watch dog enable
M3 = if no activity 3 minutes miner reload
R5 = if no activity 5 minutes rig reboot
claymore x = 680 if one GPU h under 680 miner reload