Quote from: HagssFIN on December 14, 2017, 08:51:56 PM

Quote from: unnknownuser on December 14, 2017, 08:45:40 PM

Do you recommend to update the firmware?

No need to do it, if the miner is working ok.

Quote from: unnknownuser on December 14, 2017, 08:45:40 PM

My temp at the chip is showing about 70-75, is this a good figure?

Yes.

Quote from: unnknownuser on December 14, 2017, 08:45:40 PM

The error rate is about 0.0006% (bottom of column DiffA#, right?), is this acceptable?

Yes, not bad at all.

Quote from: unnknownuser on December 14, 2017, 08:45:40 PM

And at the pool settings: Do you recommend setting three or two different pools or just my first choice pool with different ports? (Pool recommendations are welcome at this point, I'm still trying Slush, ViaBTC and BTC.com)

You can use your first choice pool with different stratum addresses.
So if you mine at Slush, depending where do you like you put the US address first, then the Europe address and then the China.

Here is an example:

Code:

Pool 1 stratum+tcp://us-east.stratum.slushpool.com:3333
Pool 2 stratum+tcp://eu.stratum.slushpool.com:3333
Pool 3 stratum+tcp://cn.stratum.slushpool.com:3333

Thank you, that helps a lot!