Quote from: killeriq on December 17, 2017, 08:36:29 PM

Quote from: papampi on December 17, 2017, 05:32:19 PM

Quote from: killeriq on December 17, 2017, 04:28:44 PM

Hello,

Please could someone explain me or point me to right direction?

Im bit confused about OC settings:

there are multiple OC parts:

1. This one i understand is the MAIN setting for all card/algo/hash

I either enable/disable PowerLimit, but the CORE and MEM stays

Code:

# OC (overclock) and Power Limit settings #
# #
########################################################

POWERLIMIT="NO" # YES or NO # Choose YES to set Global Power Limit for all GPU's

POWERLIMIT_WATTS=75 # Global Power Limit in watts for all GPU's. If enabled, INDIVIDUAL settings will override this.

__CORE_OVERCLOCK=100 # Global Core overclock for all GPU's if not using INDIVIDUAL settings

MEMORY_OVERCLOCK=100 # Global Memory overclock for all GPU's if not using INDIVIDUAL settings

2. Set this as NO - dont want to be ALGO (coin) specific

Code:

# Default values set at the end of 1bash are for 1060, remember to set yours accordingly.
ALGO_SPECIFIC_OC="NO" # YES or NO # See the description above

3. This one i thought its hash (equihash) specific OC setting, but it wont take it - ignores
So what is it for? not sure what relation it has with FANs

Code:

# ENSURE YOU USE MINER_TEMP_CONTROL for fanspeed

equihash_POWERLIMIT_WATTS=115
__equihash_CORE_OVERCLOCK=110
equihash_MEMORY_OVERCLOCK=500

4. Those are per card in case i have different models in the rig

Code:

########################################################
# #
# INDIVIDUAL Power Limit, Temp and Clock settings #
# #
########################################################

# Settings below are for rigs using INDIVIDUAL powerlimit / target temps / clocks only
# If set to YES, the INDIVIDUAL settings will override the GLOBAL settings

INDIVIDUAL_POWERLIMIT="NO" # YES or NO

# Set individual powerlimits here if INDIVIDUAL_POWERLIMIT="YES"
INDIVIDUAL_POWERLIMIT_0=100
INDIVIDUAL_POWERLIMIT_1=100

5. Not sure why are also HASH specific OC settings and also ALGO/COIN specific - bit confused Huh

Code:

# ALGO_SPECIFIC_OC settings #
# #
########################################################

# ALGO_SPECIFIC_OC settings
# OC settings you can use based on COIN or ALGO (how ever you want to categorize them)
# Deafault values are for 1060 check http://krypto-mining.blogspot.co.uk/ for other OC values

if [ $ALGO_SPECIFIC_OC == "YES" ]
then

# Equihash
if [ $COIN == "BTG" -o $COIN == "ZEC" -o $COIN == "ZEN" -o $COIN == "HUSH" -o $COIN == "ZCL" -o $COIN == "KMD" -o $COIN == "ZPOOL_EQUIHASH" -o $COIN == "MPH_EQUIHASH" -o $COIN == "NICE_EQUIHASH" -o $COIN == "VOTE" ]
then
ALGORITHM="EQUIHASH"
POWERLIMIT_WATTS=130
__CORE_OVERCLOCK=150
MEMORY_OVERCLOCK=800
fi

Your part 3 is for salfter auto switch... Don't know if there is a better way to show it

Code:

########################################################
# #
# SALFTER_NICEHASH_PROFIT_SWITCHING & #
# SALFTER_MPH_PROFIT_SWITCHING Settings #
# #
########################################################

CURRENCY=USD

POWER_COST=0.20

MINIMUM_PROFIT=0.0

MPH_USERNAME=replace_with_your_MPH_username

PAYMENT_ADDRESS="$BTC_ADDRESS"

WORKER_NAME="$WORKERNAME"

PROFIT_CHECK_TIMEOUT=600

# ENSURE YOU USE MINER_TEMP_CONTROL for fanspeed

daggerhashimoto_POWERLIMIT_WATTS=120
__daggerhashimoto_CORE_OVERCLOCK=100
daggerhashimoto_MEMORY_OVERCLOCK=100

If you want individual OC its the last part of 1bash your part 5

Ah the no.3 its only setting when im using the SALFTER_MPH_PROFIT_SWITCHING Settings ?
If i dont use that switcher (this setting WTM_AUTO_SWITCH="NO" ) it ignores the OC values. Did i get it right?

No.1

Code:

# OC (overclock) and Power Limit settings #
# #
########################################################

POWERLIMIT="NO" # YES or NO # Choose YES to set Global Power Limit for all GPU's

POWERLIMIT_WATTS=75 # Global Power Limit in watts for all GPU's. If enabled, INDIVIDUAL settings will override this.

__CORE_OVERCLOCK=100 # Global Core overclock for all GPU's if not using INDIVIDUAL settings

MEMORY_OVERCLOCK=100 # Global Memory overclock for all GPU's if not using INDIVIDUAL settings

Those are OC setting in TOP of other ?

POWERLIMIT="NO" - will be able to take Watts from values bellow ALGO OC (No.5) and Individual (No.4)

POWERLIMIT="YES" - if i set POWERLIMIT_WATTS=75 other No.4/5 wont go above 75?

How are those 2 managed:
__CORE_OVERCLOCK=100 # Global Core overclock for all GPU's if not using INDIVIDUAL settings
MEMORY_OVERCLOCK=100

- does it overwrite also ALGO OC? (No.5)?

Thanks

Here is the order of precedence for OC:

1) If INDIVIDUAL_CLOCKS=YES, those will override any other OC settings
2) If damNmad_ALGO_SPECIFIC_OC=YES, settings in that section (bottom of 1bash) override __CORE_OVERCLOCK and MEMORY_OVERCLOCK
3) __CORE_OVERCLOCK and MEMORY_OVERCLOCK determine OC settings

Hope this helps.