Quote from: blissz on December 23, 2017, 03:12:39 PM

v2.04 beta :: 22/12 :: test version

Download:
https://mega.nz/#!ulYlTB4D!nEymzPvujO17EXa95q9_oRHAQOxZUZvxu_bulZ8_wUA

Changes 22/12:
- reboots the D3 on high temperatures (> 85 deg PCB temp). This feature will save your unit in case your fans will fail.
- improved auto tune algorithm stability
- Increased the chip starting frequency of the autotune algorithm for higher voltages.

Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected

Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface Cheesy

- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status

Important: The autotune feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:

set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information

Thank you!

https://img15.hostingpics.net/pics/453940Untitled.jpg

Here is my log if it helps

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:

0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238536k/238536k available, 23608k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015441] pid_max: default: 32768 minimum: 301
[ 0.015673] Security Framework initialized
[ 0.015767] Mount-cache hash table entries: 512
[ 0.024591] Initializing cgroup subsys cpuacct
[ 0.024625] Initializing cgroup subsys memory
[ 0.024687] Initializing cgroup subsys blkio
[ 0.024825] CPU: Testing write buffer coherency: ok
[ 0.025403] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025477] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026807] Brought up 1 CPUs
[ 0.026831] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028128] devtmpfs: initialized
[ 0.092492] pinctrl core: initialized pinctrl subsystem
[ 0.092709] rstctl core: initialized rstctl subsystem
[ 0.093202] regulator-dummy: no parameters
[ 0.093771] NET: Registered protocol family 16
[ 0.094478] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104155] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104336] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105423] platform 49000000.edma: alias fck already exists
[ 0.105456] platform 49000000.edma: alias fck already exists
[ 0.105484] platform 49000000.edma: alias fck already exists
[ 0.106635] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106815] OMAP GPIO hardware version 0.1
[ 0.108226] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109546] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110862] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111501] of_get_named_gpio_flags exited with status 52
[ 0.111533] gpio-rctrl rstctl.3: loaded OK
[ 0.116646] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119862] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122050] cpsw.0: No hwaddr in dt. Using 9c:1d:58:ec:ec:2d from efuse
[ 0.122082] cpsw.1: No hwaddr in dt. Using 9c:1d:58:ec:ec:2f from efuse
[ 0.137651] bio: create slab at 0
[ 0.149776] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150018] of_get_named_gpio_flags: can't parse gpios property
[ 0.150312] vmmcsd_fixed: 3300 mV
[ 0.153422] SCSI subsystem initialized
[ 0.153873] usbcore: registered new interface driver usbfs
[ 0.153988] usbcore: registered new interface driver hub
[ 0.154320] usbcore: registered new device driver usb
[ 0.156431] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156465] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156661] media: Linux media interface: v0.10
[ 0.156757] Linux video capture interface: v2.00
[ 0.156875] pps_core: LinuxPPS API ver. 1 registered
[ 0.156891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.157607] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158794] Switching to clocksource gp_timer
[ 0.176810] NET: Registered protocol family 2
[ 0.177798] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177888] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177977] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.178071] TCP: reno registered
[ 0.178098] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178144] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178637] NET: Registered protocol family 1
[ 0.179228] RPC: Registered named UNIX socket transport module.
[ 0.179249] RPC: Registered udp transport module.
[ 0.179262] RPC: Registered tcp transport module.
[ 0.179276] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179662] Trying to unpack rootfs image as initramfs...
[ 1.965876] Freeing initrd memory: 12380K
[ 1.966561] CPU PMU: probing PMU on CPU 0
[ 1.966595] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.967128] omap2_mbox_probe: platform not supported
[ 1.971048] VFS: Disk quotas dquot_6.5.2
[ 1.971286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.972688] NFS: Registering the id_resolver key type
[ 1.972792] Key type id_resolver registered
[ 1.972809] Key type id_legacy registered
[ 1.972875] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.973309] msgmni has been set to 490
[ 1.976169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.976195] io scheduler noop registered
[ 1.976211] io scheduler deadline registered
[ 1.976269] io scheduler cfq registered (default)
[ 1.980307] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.982738] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.983031] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.643924] console [ttyO0] enabled
[ 2.648460] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.657214] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.665845] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.674456] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.683477] [drm] Initialized drm 1.1.0 20060810
[ 2.702123] brd: module loaded
[ 2.712391] loop: module loaded
[ 2.716564] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.726496] nand_get_flash_type: 2c,f1 against 2c,f1
[ 2.732019] ONFI param page 0 valid
[ 2.735692] ONFI flash detected
[ 2.739011] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 2.750922] omap2-nand: detected x8 NAND flash
[ 2.755585] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.761166] omap2-nand: using custom ecc layout
[ 2.766000] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.772392] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.778068] 0x000000000000-0x000000020000 : "spl"
[ 2.784891] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.792346] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.799744] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.807089] 0x000000080000-0x000000240000 : "u-boot"
[ 2.815352] 0x000000240000-0x000000260000 : "bootenv"
[ 2.822281] 0x000000260000-0x000000280000 : "fdt"
[ 2.828906] 0x000000280000-0x000000780000 : "kernel"
[ 2.839882] 0x000000800000-0x000001c00000 : "root"
[ 2.863333] 0x000001c00000-0x000003000000 : "config"
[ 2.887068] OneNAND driver initializing
[ 2.892794] usbcore: registered new interface driver asix
[ 2.898607] usbcore: registered new interface driver cdc_ether
[ 2.904841] usbcore: registered new interface driver smsc95xx
[ 2.910952] usbcore: registered new interface driver net1080
[ 2.916973] usbcore: registered new interface driver cdc_subset
[ 2.923260] usbcore: registered new interface driver zaurus
[ 2.929261] usbcore: registered new interface driver cdc_ncm
[ 2.935982] usbcore: registered new interface driver cdc_acm
[ 2.941945] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.950324] Initializing USB Mass Storage driver...
[ 2.955558] usbcore: registered new interface driver usb-storage
[ 2.961857] USB Mass Storage support registered.
[ 2.966889] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.973627] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.978864] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.987630] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.987652] musb-hdrc: MHDRC RTL version 2.0
[ 2.987666] musb-hdrc: setup fifo_mode 4
[ 2.987695] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.987843] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.992888] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.998953] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 3.004218] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 3.013201] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.013223] musb-hdrc: MHDRC RTL version 2.0
[ 3.013238] musb-hdrc: setup fifo_mode 4
[ 3.013260] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.013412] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 3.018469] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 3.023776] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.030229] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.038466] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.038571] usb usb1: default language 0x0409
[ 3.038630] usb usb1: udev 1, busnum 1, minor = 0
[ 3.038654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.045782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.053353] usb usb1: Product: MUSB HDRC host driver
[ 3.058568] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.064234] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.070194] usb usb1: usb_probe_device
[ 3.070224] usb usb1: configuration #1 chosen from 1 choice
[ 3.070289] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.070491] hub 1-0:1.0: usb_probe_interface
[ 3.070514] hub 1-0:1.0: usb_probe_interface - got id
[ 3.070541] hub 1-0:1.0: USB hub found
[ 3.074595] hub 1-0:1.0: 1 port detected
[ 3.078763] hub 1-0:1.0: standalone hub
[ 3.078816] hub 1-0:1.0: individual port power switching
[ 3.078837] hub 1-0:1.0: no over-current protection
[ 3.078854] hub 1-0:1.0: Single TT
[ 3.078875] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.078895] hub 1-0:1.0: power on to power good time: 10ms
[ 3.078953] hub 1-0:1.0: local power source is good
[ 3.079069] hub 1-0:1.0: enabling power on all ports
[ 3.080107] mousedev: PS/2 mouse device common for all mice
[ 3.088145] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.095647] 44e3e000.rtc: already running
[ 3.100151] i2c /dev entries driver
[ 3.105192] pps_ldisc: PPS line discipline registered
[ 3.110664] Driver for 1-wire Dallas network protocol.
[ 3.117942] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.125496] cpuidle: using governor ladder
[ 3.129816] cpuidle: using governor menu
[ 3.134384] of_get_named_gpio_flags exited with status 6
[ 3.134404] of_get_named_gpio_flags: can't parse gpios property
[ 3.134420] of_get_named_gpio_flags: can't parse gpios property
[ 3.134458] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.141681] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.148483] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.155695] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.163005] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.169952] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.180526] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.204542] of_get_named_gpio_flags exited with status -517
[ 3.204611] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.212270] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.219031] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.226227] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.234395] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.240687] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.247869] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.260138] usbcore: registered new interface driver usbhid
[ 3.266060] usbhid: USB HID core driver
[ 3.272962] TCP: cubic registered
[ 3.276483] Initializing XFRM netlink socket
[ 3.281060] NET: Registered protocol family 17
[ 3.285948] NET: Registered protocol family 15
[ 3.290877] Key type dns_resolver registered
[ 3.295511] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.303591] ThumbEE CPU extension supported.
[ 3.308102] Registering SWP/SWPB emulation handler
[ 3.314113] registered taskstats version 1
[ 3.320720] of_get_named_gpio_flags exited with status -517
[ 3.320795] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.377708] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.384157] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.398646] libphy: 4a101000.mdio: probed
[ 3.402971] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.413206] Detected MACID = 9c:1d:58:ec:ec:2d
[ 3.417890] cpsw 4a100000.ethernet: NAPI disabled
[ 3.423279] of_get_named_gpio_flags exited with status -517
[ 3.423345] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.432066] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.441349] cpu0 supply cpu0 not found, using dummy regulator
[ 3.447862] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.453683] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.466446] ALSA device list:
[ 3.469677] No soundcards found.
[ 3.474222] Freeing init memory: 264K
[ 3.478274] Failed to execute /init
[ 4.451039] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.793354] net eth0: initializing cpsw version 1.12 (0)
[ 5.802359] net eth0: phy found : id is : 0x7c0f1
[ 5.807836] libphy: PHY 4a101000.mdio:01 not found
[ 5.813042] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 9.950466] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 29 17:10:44 (none) local0.err cgminer: Miner compile time: Fri Dec 22 16:38:56 CST 2017 type: Antminer D3 Blissz v2.04 beta
Dec 29 17:10:44 (none) local0.warn cgminer: Started cgminer 4.10.0
Dec 29 17:10:44 (none) local0.warn cgminer[376]: bitmain_DASH_init
Dec 29 17:10:44 (none) local0.warn cgminer[376]: check_fan_speed OK
Dec 29 17:10:44 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 29 17:10:44 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 29 17:10:44 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 29 17:10:44 (none) local0.notice cgminer[376]: detect total chain num 3
Dec 29 17:10:44 (none) local0.notice cgminer[376]: i2c init ok
Dec 29 17:10:44 (none) local0.notice cgminer[376]: check_whether_need_update_pic_program
Dec 29 17:10:46 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:47 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:10:47 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 29 17:10:49 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:50 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:10:51 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 29 17:10:52 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:53 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:10:54 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 29 17:10:54 (none) local0.notice cgminer[376]: every_chain_reset_PIC16F1704_pic_new
Dec 29 17:10:55 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:57 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:59 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 29 17:10:59 (none) local0.notice cgminer[376]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 29 17:10:59 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:11:00 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:11:01 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 29 17:11:01 (none) local0.notice cgminer[376]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 29 17:11:01 (none) local0.notice cgminer[376]: pic_heart_beat_func_new
Dec 29 17:11:01 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 29 17:11:01 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 29 17:11:01 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: reset_all_hash_board
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Dec 29 17:11:02 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Dec 29 17:11:02 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: open device over
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
Dec 29 17:11:02 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
Dec 29 17:11:02 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: open device over
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
Dec 29 17:11:02 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
Dec 29 17:11:02 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
Dec 29 17:11:02 (none) local0.notice cgminer[376]: open device over
Dec 29 17:11:02 (none) local0.notice cgminer[376]: tty_init_chain
Dec 29 17:11:02 (none) local0.notice cgminer[376]: open device over
Dec 29 17:11:02 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Dec 29 17:11:02 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 60 ASICs
Dec 29 17:11:03 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Dec 29 17:11:03 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Dec 29 17:11:03 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 29 17:11:03 (none) local0.notice cgminer[376]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x0000001b
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_frequency: frequency = 400
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_frequency_chain: frequency = 400
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_frequency_chain: frequency = 400
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_frequency_chain: frequency = 400
Dec 29 17:11:03 (none) local0.warn cgminer[376]: error freq,set default freq(200M) instead
Dec 29 17:11:03 (none) local0.notice cgminer[376]: set_frequency_chain: frequency = 0
Dec 29 17:11:03 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 29 17:11:03 (none) local0.notice cgminer[376]: Now Set

Chain Address

Dec 29 17:11:04 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 29 17:11:04 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
Dec 29 17:11:05 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Dec 29 17:11:05 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Dec 29 17:11:06 (none) local0.notice cgminer[376]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 29 17:11:06 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 29 17:11:06 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 29 17:11:06 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 29 17:11:06 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 29 17:11:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 29 17:11:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 29 17:11:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 29 17:11:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 29 17:11:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 29 17:11:06 (none) local0.notice cgminer[376]: 0 calibration_sensor_offset_chain
Dec 29 17:11:06 (none) local0.notice cgminer[376]: chain:0 local:32 remote:35
Dec 29 17:11:06 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 29 17:11:06 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 29 17:11:07 (none) local0.notice cgminer[376]: chain:0 local:32 remote:32
Dec 29 17:11:07 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 29 17:11:07 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 29 17:11:07 (none) local0.notice cgminer[376]: 1 calibration_sensor_offset_chain
Dec 29 17:11:07 (none) local0.notice cgminer[376]: chain:1 local:30 remote:32
Dec 29 17:11:07 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 29 17:11:08 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Dec 29 17:11:08 (none) local0.notice cgminer[376]: 2 calibration_sensor_offset_chain
Dec 29 17:11:08 (none) local0.notice cgminer[376]: chain:2 local:30 remote:33
Dec 29 17:11:08 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 29 17:11:09 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
Dec 29 17:11:09 (none) local0.notice cgminer[376]: chain:2 local:30 remote:30
Dec 29 17:11:09 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 29 17:11:09 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
Dec 29 17:11:09 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
Dec 29 17:11:09 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 29 17:11:10 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 29 17:11:10 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
Dec 29 17:11:10 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 29 17:11:10 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Dec 29 17:11:10 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
Dec 29 17:11:10 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 29 17:11:10 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
Dec 29 17:11:10 (none) local0.notice cgminer[376]: frequency = '400'
Dec 29 17:11:10 (none) local0.notice cgminer[376]: dev.timeout = 754956 us
Dec 29 17:11:10 (none) local0.notice cgminer[376]: open_core_chain
Dec 29 17:11:11 (none) local0.notice cgminer[376]: open_core_chain
Dec 29 17:11:11 (none) local0.notice cgminer[376]: open_core_chain
Dec 29 17:11:11 (none) local0.notice cgminer[376]: open_core_chain
Dec 29 17:11:12 (none) local0.err cgminer[376]: low hashrate detection trigger: 12585.600000 Gh/s
Dec 29 17:11:12 (none) local0.notice cgminer[376]: set voltage = 1143.942031 real:255 mv
Dec 29 17:11:13 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 29 17:11:13 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 29 17:11:13 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 29 17:11:14 (none) local0.err cgminer[376]: cgminer time error total_secs = 1514567474.017350 last_total_secs = 1.000000
Dec 29 17:11:14 (none) local0.warn cgminer[376]: Pool 1 stratum+tcp://dash-us.coinmine.pl:6099 alive, testing stability
Dec 29 17:11:14 (none) local0.warn cgminer[376]: Switching to pool 1 stratum+tcp://dash-us.coinmine.pl:6099
Dec 29 17:11:14 (none) local0.warn cgminer[376]: Pool 0 stratum+tcp://dash.suprnova.cc:9991 alive, testing stability
Dec 29 17:11:14 (none) local0.warn cgminer[376]: Switching to pool 0 stratum+tcp://dash.suprnova.cc:9991
Dec 29 17:11:20 (none) local0.warn cgminer[376]: API running in IP access mode on port 4028 (15)